Dortronics Systems, Inc.

The 6510 series of emergency pull stations provide conspicuous signaling or release in case of emergency. These easy to operate stations require a single pull action to actuate. Dual SPDT switches allow connection to an alarm or access control system while simultaneously breaking or making power to a lock or siren using the second set of contacts.

Features:

• Multiple Applications: Ideal for use in hospitals, schools, industrial facilities and office buildings. Use for emergency exit door release with badge in/out access control systems, or door interlock and mantrap type systems. The wide variety of colors and text make these units suitable for signaling an alarm panel of any natural disaster, hazmat incident, or medical emergency. Deters unauthorized access, i.e. smoking in stairwells, and nuisance access to fire escapes.
• Customized Labels: Custom labels may be ordered by contacting the factory. These would be special order and lead times will vary accordingly.
• Easy Mounting & Wiring: Two mounting screws are all that’s needed to surface mount the 6510. The unit mounts to a standard single gang electrical box. Matching color back boxes are also available for surface mounting. Back boxes have conduit knock outs for easy wiring access. Wiring is accomplished by utilizing the screw terminals on the back of the unit to connect to any system or device. All units are pre-wired, simply cut the wire not needed for a normally open or normally closed contact.
• Key Reset: Following actuation the pull station is reset by opening the front cover (with the key provided) and installing a new acrylic break rod. Close and relock the cover and the 6510 is restored and ready for the next emergency.
• Highly visible
• Reliable operation
• Key reset
• Deter unauthorized access
• Medical emergencies
• Natural disasters

Specifications:

• Electrical: Utilizes (2) SPDT switches in parallel switch rating 1Amp @ 30 VDC or VAC UL Listed for indoor or outdoor use.
• Physical: 5” Long x 2-5/8” wide x 1” deep minimum clearance behind unit for wiring 1-1/2” All metal housing construction Large self clamping screw terminals mounted on a four point barrier strip baked on powder coated finish pressure sensitive mylar labels with raised text Included key for re-set and one plexiglass break rod, two mounting screws.
• Operation: Pulling on the T shaped handle activates both SPDT switches, and simultaneously breaks the plexiglass rod. To reset insert key and turn clockwise opening the front housing cover. Place pull handle back into position, insert new break rod, close cover and turn key counter clockwise to lock. Station is now reset.

Specify Color:

• BL - Blue
• BK - Black
• YL - Yellow