Schlage Electronic Security

The Scan II is a compact, passive infrared detector specifically designed for “request to-exit” applications. It features adjustable relay latch time, an externally visible activation LED, and two form “C” relays. The high-impact ABS plastic enclosure in black or white comes apart in 3 pieces for easy mounting and lock-in-place scanner angle adjustment. Internal angle setting marks aide optimal coverage configuration for both wall and ceiling mounting. Mounting height is 7 to 15 feet allowing coverage area of the Scan II sensor of up to 8 by 10 ft (2.4 m by 3 m).

Features:

• Adjustable relay latch time from 0.5 to 64 seconds
• Field-selectable fail safe/fail secure
• Included pattern masking kit snaps in place to narrow scan field and help prevent unwanted activations
• Activation LED is visible at a distance and can be configured to OFF as needed
• Intended for indoor use only
• Wall or ceiling mounted with lock-in-place angle adjustment
• UL294 and ULC-S319, Class 1 listed by manufacturer
• High-impact ABS plastic enclosure and internal electronics can endure temperatures of -20° to 120°F
• Inconspicuous unit is only 1.5” x 6.25” x 1.5” in either black or white

Specifications:

• Models:
• Scan II-B: black with externally visible activation LED
• Scan II-W: white with externally visible activation LE
• Power requirements:
• 12/24 VDC: 35 mA @ 12 VDC; 38 mA @ 24 VDC when activated
• 12/24 VAC: 42 mA @ 12 VAC; 48 mA @ 24 VAC when activated
• 38 Mah required for standby operation (no internal standby battery)
• Relay: Two form "C" relay contacts rated 2.0 Amp @ 30 VDC or VAC maximum for DC resistive loads

Installation Options:

• Adjustable relay latch time from 0.5 to 64 seconds
• Relay mode can be programmed to reset when timer expires or remain activated until motion stops
• Field-selectable fail safe/fail secure
• Mounting height of 7 to 15 feet (indoors only)
• Lock-in-place pattern adjustment is +/- 14° with separate settings for wall vs. ceiling application