IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
E4 Enclosure with 250W Power Supply, Single Voltage

Part#: LSIFPO250-E4
Hot#: 150965

Available: 5 ( 1 DEN, 4 SLC )

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Lifesafety Power Inc


The Flexpower FPO250-E4 is an offline switch mode power supply battery charger specifically designed for the lifesafety industry. Capable of providing two power outputs, user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space. One output provides continuous output power for system use, the second is programmable for either fail-safe or fail-secure operation, activated when the fire alarm disconnect is initiated. Complete fault detection and reporting, with programmable fault delays, is provided along with datalogging capability of fault occurrence, battery usage time and current power supply status.

Features:

  • Fully modular power management system
  • Multiple outputs for system power, direct lock control and accessory power distribution modules
  • Fire alarm interface for egress lock control (FAI)
  • Configurable fail-safe / fail-secure modes of operation
  • Comprehensive fault detection and reporting including optional earth ground and battery presence
  • AC and system fault output relays can be delayed via PowerCom
  • Microprocessor dual rate charging restores battery sets from 4 to 80 amp hours

Specifications:

  • Input Voltage: 120/230 VAC
  • Input Power (max): 282 Watts
  • Output Voltage: 12 or 24 VDC
  • Output Current: 20 or 10 Amps
  • Battery Charge Capacity: 80Ah
  • Efficiency: 88%
  • Output Ripple: 120 mVp-p
  • Line Regulation: 0.1 ±%
  • Load Regulation: 2 ±%
  • BTU Rating: 109 BTU/Hr
  • Continuous Power Outputs: 1
  • Switched Power Outputs: 1
  • Fire Alarm Interface: Yes

Specifications for Lifesafety Power Inc LSIFPO250-E4

Other Specs
Access TypePower Supply
Alternate CodesFPO250-E4, FPO250E4
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies
Voltage/Amp Rating12 - 24V DC