IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
SFIC - Classroom Intruder Clutched Lever Lockset, Small Format IC, Less Core, 2-3/4in Backset, ANSI Strike, Grade 1, 626/US26D Satin Chrome

Part#: MAR195RDB/26D
Hot#: 139126
 Finish: Satin Chrome

Available: 99+ ( 10 DEN, 86 KAN, 1 LA, 12 PHX, 3 SEA, 1 STX )

Deadlocking latch by lever either side, except when outside lever locked by key inside. Key outside retracts deadlocking latch. Inside always open.


  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Marks Hardware


Cylindrical locksets are designed for use in situations where durability is the deciding factor. Our cylindrical lock chassis are all constructed with cast retractors on bronze roller bearings. This strong, durable component gives our cylindrical sets the ability to last millions of cycles and is available in knob and lever sets. The Survivor leverset has a unique "clutch" mechanism that radically reduces the wear and abuse that typical cylindrical lever sets endure. When locked, the levers of the Survivor disengage from the retractor and other interior mechanisms of the lock. The levers of the Survivor swing freely, without resistance. This reduces the amount of wear on lock components and eliminates "lever droop". The use of a clutch results in longer lasting, lower maintenance, eloquent solution.

Features:

  • High quality, longer lasting, lower maintenance design
  • Competitively-priced for exceptional value
  • Exceeds BHMA grade 1 spec by 300%, over 3.6 million cycles
  • Unique stainless steel "clutch" and bronze bearings dramatically reduce wear and abuse & eliminates lever droop
  • Marks Lifetime Mechanical Warranty
  • 3-Hour Fire Rated; 2-3/8" and 2-3/4 Backsets

Specifications:

  • Backset: 2-3/4”
  • Latch #1834, Front: 1-1/8” x 2-1/4”; Throw: 9/16”; stainless steel nose
  • Levers: Solid cast zamac; w/ 1/2” return (except 395 & 495)
  • Roses: Thru-bolted, 3-7/16” dia, spring loaded 2-#10 thru-bolts
  • Strike: #1135, 4-7/8” ASA curved lip strike
  • Door Thickness: 1-5/8” to 1-7/8”; For 1-3/8” door use K1904 spacer
  • Cylinder: Marks “C” keyway, 6 pin w/ 2 keys

Functions:

  • N: Passage
  • L: Privacy
  • P: Patio
  • DC: Communicating
  • AB: Entry
  • AQ: Exit
  • S: Classroom
  • F: Storeroom
  • DW: Institution
  • DA: Vestibule
  • T: Corridor
  • TO: Time out
  • TK: Hospital/privacy
  • GB: Store door
  • BS: Service station lock
  • H : Hotel
  • DB: Classroom intruder
  • DO: Dummy trim outside
  • DT: Full dummy trim
  • NB: Communicating passage
  • FB: Communicating storeroom
  • SB: Communicating classroom
  • FEL: Electrically locked
  • FEU: Electrically unlocked

Finishes:

  • 3 - Bright brass
  • 32D - Stainless steel
  • 10B - Dark bronze
  • 26D - Satin chrome

Specifications for Marks Hardware MAR195RDB/26D

Specifications
ManufacturerMarks USA
Other Specs
Alternate Codes139126, 195RDB/26D, 195RDB26D
Backset2-3/4"
CategoryCommercial Locks, Cylindrical Levers, Lock Sets
CertificationsA156.2, ANSI, UL Listed 3 Hour
Cylinder TypeInterchangeable , Less Core
Door ApplicationLock Sets
Door Thickness1-5/8"-1-7/8"
Finish Code626
Finish ColorSatin Chrome
Fire RatedYes
Fire Rating120 min
FunctionClassroom Intruder
GradeGrade 1
Latch Throw9/16"
Latchbolt TypeDeadlatch
Lever DesignAmerican
Rose/Escutcheon3-7/16" Diameter, Spring Loaded
Series95 Line