IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
KIT - 351 Series Surface Door Closer, Powerglide Series, Aluminum Body, Grade 1, Through Bolts (1-3/4" Standard), Adjustable Spring Size 1-6, UL Listed for Fire Rated Doors, Universal Arm Package, with Cover, 689/EN Sprayed Aluminum

Part#: SARTB351UO-EN
Hot#: 151316
Mfg: Sargent

Available: 99+ ( 79 DAL, 27 DEN, 34 LA, 39 LV, 31 PHX, 30 SAC, 32 SEA, 23 SLC, 40 STX )

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Sargent 351 Series


The 351 series Powerglide door closer features heavy-duty construction for superior strength and wear resistance. It is ideally suited for highly trafficked environments like schools, healthcare facilities, office buildings, and commercial buildings. With a full complement of arm types and front-facing valves, this door closer can be easily installed and maintained—for interior and exterior applications.

Features:

  • Self sticking templates supplied for most applications
  • Adjustable spring power allows a size range of 1 through 6.
  • Non-handed
  • One door closer body for all applications
  • High impact non-corrosive plastic covers with two machine screws standard
  • All weather fluid
  • 1-1/2" diameter piston
  • Standard pressure relief valves for both opening and closing cycles
  • Heat treated full closed rack and pinion construction
  • Heavy duty one-piece die cast aluminum silicon alloy body
  • 1/2" arm engagement over a 7/16 square spindle
  • Machine and self tapping screws
  • Adjustable backcheck
  • Captured valves
  • All weather fluid allows closer to operate effectively in extreme temperatures without readjustment
  • 1-1/2" diameter piston for superior door control
  • Standard pressure relief valves protect the door & frame from damage caused by abuse
  • All valves are controlled by an 1/8" allen wrench to discourage tampering and are captivated to prevent removing valves from the body and damaging door closer
  • Heat treated full closed rack and pinion provide control from the full open position
  • Heavy duty one piece die cast aluminum silicon alloy body with 14% silicon provides superior strength and wear resistance
  • Heavy duty forged steel arms are finely finished and interchangeable between Sargent 351, 1431 and 281 Series

Specifications:

  • Arm Material: Forged steel
  • Body Material: Die cast aluminum
  • Closer Type: Surface
  • Minimum Hold Open Degree: 120°
  • Maximum Hold Open Degree: 180°
  • Warranty: 30-year limited warranty

Arms and Accessories for Standard Applications:

  • O - Standard Arm:
    • Forged steel main arm
    • Non-handed
    • Permits 120° door opening with standard mounting
    • Permits 180° door opening with alternate mounting or corner bracket
    • Can be used with the 351L retrofit plate when replacing a LCN 4040 closer
  • H - Hold Open Arm:
    • Forged steel main arm
    • Non-handed
    • Hand is changed by inverting the foot assembly
    • Friction type holder easily adjusted by a wrench
    • Permits 180° door opening
    • Holds open from 80° – 180°
  • O8 - Mortise Foot Arm:
    • Forged steel main arm
    • Non-handed
    • Permits 120° door opening
    • Commonly used with bull nose frames
  • H8 - Mortise Foot Hold Open Arm:
    • Forged steel main arm
    • Handed same as door
    • Friction type holder easily adjusted by a wrench
    • Holds open from 80° – 180°
  • OLC - Standard Arm for Low Ceiling:
    • Forged steel main arm
    • Non-handed
    • 1-1/4" between the top of door to ceiling is required for OLC arm
    • Permits 120° door opening with standard mounting
  • UH Package:
    • Universal hold open arm package provides brackets and arms to install closer in top jamb, standard or parallel applications
    • Order closer as 351-UH x finish
    • 351-UH not available with (MC) metal cover or plated finishes
  • UO Package:
    • Universal arm package provides brackets and arms to install closer in standard top jamb or parallel applications
    • Order closer as 351-UO x finish
    • 351-UO not available with (MC) metal cover or plated finishes
  • 351-A Mounting Plate: Allows the mounting of a 351 closer onto a door with a minimum top rail of 2-3/8". Order as: 351-A x finish
  • 351- LCN Retrofit Plate: Allows an LCN 4040 closer body to be replaced with a Sargent 351 with an O arm without drilling new holes in door (Note: New holes required for arm bracket only) Order as: 351L x finish

Finishes:

  • EB/695 - Bronze powder coated to match finish 10B
  • EN/689 - Aluminum powder coated
  • ED/693 - Black powder coated to match finish 20D
  • EAB/696 - Brass powder coated
  • EP/691 - Bronze powder coated to match finish 10
  • 03/605 - Bright brass, clear coated
  • 04/606 - Satin brass, clear coated
  • 09/611 - Bright bronze, clear coated
  • 10/612 - Satin bronze, clear coated
  • 10B/613 - Dark oxidized satin bronze, oil rubbed
  • 10BE/613E - Dark oxidized satin bronze - equivalent
  • 10BL/614 - Oxidized satin, bronze, clear coated
  • 14/618 - Bright nickel plated, clear coated
  • 15/619 - Satin nickel, clear coated
  • 20D/624 - Statuary dark bronze, clear coated
  • 26/625 - Bright chromium plated
  • 26D/626 - Satin chromium plated
  • BSP - Black suede powder coat
  • WSP - White suede powder coat

Specifications for Sargent SARTB351UO-EN

Other Specs
Alternate CodesSARTB351UOEN, TB351UO-EN, TB351UOEN
Arm TypeUniversal Arm
CategoryDoor Closers, Surface Mount Closers, Surface Mount Door Closers
Door ApplicationSurface Mount Closers
Finish Code689
Finish ColorAluminum Powder Coated, EN, Sprayed Aluminum
Part TypeThru Bolt
Series351