
Wireless Motion Detector PIR
Part#: NAPGEM-PIR
Hot#: 115697
Mfg: Napco Security Alarm
Available: 22 ( 22 SLC )
Notice: The info below is not item specific.
Napco Security Alarm
The GEM-PIR is an advanced PIR sensor designed for use with Napco's GEM-series wireless receivers. The unit is powered by two 3-volt lithium batteries (supplied) for long service life. When battery voltage drops below normal, a low-battery report will be sent to the receiver (replace with Duracell DL123A or Varta/ power-one CR123A only). Coding switches are not used in the GEM-PIR. Each transmitter has a unique factory-programmed RF ID code (printed on the unit) that distinguishes itself to the receiver.
Features:
- Signal selective processing for reliable operation
- Unique circuit design protects against false alarms due to radio-frequency interference
- Vertical and horizontal aiming capabilities
- Dual-element sensor
- Lens Bank of optional accessory lenses
- Large lens area assures high sensitivity
- Small size with ample wiring space
- Corner mountable
- Built-in tamper microswitch
Specifications:
- PIR Coverage (l x w): 50' x 50' (15.2m x 15.2m) at 20°C (68°F), typical.
- Operating Temperature: 0° to +50°C (32° to 122°F)
- Mounting: Wall or corner, 10' (3m) max.
- Dimensions: 4.5'' x 2.5'' x 1.7'' (11.4cm x 6.4cm x 4.3cm)(HxWxD)
- Shipping Weight: 6.4oz (181gm)
Specifications for Napco Security Alarm NAPGEM-PIR
Other SpecsAlternate Codes | 115697, GEM-PIR, GEMPIR |
Category | Access Control, Alarms & Intercom, Burglar Alarms, Switches, Sensors & Contacts |
Part Type | Detectors |
Style | Motion Sensor |