
Please Contact your IML Representative for Details
Napco Security Alarm
The Gemini GEM-X255 hybrid panel is our largest control panel, and the biggest in the industry with up to 255 fully programmable hardwire/wireless zones and 195 individual user codes. The X255 follows in the footsteps of our dependable Gemini panel product line offering top quality and flexible programming with its Windows-based PCD-WINDOWS software. And the X255 is compatible with the same Gemini wireless and peripherals used with other Gemini panels, and proven superior in independent tests. The Gemini X255 starts with 8 on-board zones and is expandable through Gemini EZM expansion modules or Gemini wireless points. Built on the platform of the field-proven, popular GEM-P9600 and P3200, the product features both familiarity and support of the consumer-friendly GEM-RP1CAE2 custom alphanumeric keypad, too. The X255 uniquely offers fuseless maintenance-free operation, plus it features 8 independent area partitions, 255 event scheduler, and 800 event log. The X255 also supports 2-wire and 4-wire smoke detectors, and supports up to 64 separately addressable X-10 devices with the GEM-X10KIT.
Features:
- 8 to 255 zones, hardwire or wireless zones from GEM EZM8 zone- expansion modules and RP1/K1 4-zone keypads or wireless points using Gemini receivers
- Including up to 8 2-wire fire zones
- Up to 195 individually coded users, each with a programmable authority level
- Exclusive RS232 panel-port supports PC home automation/ networking integration for 9600 baud comprehensive communications
- Fuseless maintenance-free operation
- 8 End-of-line-resistor burglary zones programmable for area, exit/entry delay, interior, follower, day zone, chime, fire option, sensor watch, swinger shutdown, zone ANDing and a variety of other features
- 3 on-board relay outputs; expandable to 99
- Three keypad panics: fire, police & auxiliary
- Up to 8 independent area partitions
- Up to 8 separate access stations for up to 195 users
- Up to 64 separately-addressable X-10 devices with the GEM-X10KIT
- English-language prompts & system status messages from keypad (GEM-RP1CAe2 installed “with 255 support” only)
- User-customized zone descriptions, reprogrammable as required
- Supports 2-wire and 4-wire smoke detectors
- Reports alarms, restores and troubles by zone
- 255 event schedule
- 800 event log
- Overview mode permits monitoring and control of total system from one keypad
- Supports up to 4 RF receivers
- Guard-tour programmable for start time, tour length, and check points (tour stations)
- 2 programmable entry delay times
- 2 interior-bypass groups
- Dynamic battery test interrupts charging and places battery under load every four hours
- Chime by zone; programmable duration
- Non-volatile RAM retains memory during power losses
- PCD-Windows programmable
- Auto-download log
- Exclusive V.A.L.I.D. feature (verifying automatic line integrity diagnostic) reduces false alarms due to changes in line resistance
Specifications:
- Operating temperature: 0-49ºC (32-120ºF)
- Input power: 16.5Vac via class 2 Plug-In 40VA transformer, supplied Loop voltage: 10-13VAC
- Loop current: 2.5mA with 2.2ohm end-of-line resistor (model EOL2.2K); 5mA for 2-wire smoke-detector zones
- Loop resistance: 300W max.; 50W for 2-wire smoke detector zones
- Relay outputs: (burglary; reset; aux): wet, 12Vdc, 1.2A max.; dry (cut related jumper for dry contacts), SPDT contacts 24Vdc, 2A
- Auxiliary power output: 12 Vdc regulated
- Remote power output: 12Vdc regulated (for keypads) 750 mA combined standby current (remote power + aux. power + reset relay power)
- Standby time: Residential fire/burglary & commercial burglary, 4 hours minimum
- EZM Module: GEM-EZM8: input, 50mA (including PGM Output) PGM output: 5mA, 12V special application
- Keypad current: GEM-RP1CAe2, GEM K1CA: 100mA; 35mA if back lighting is disabled (cut W1, W2 & W3) PGM output: 5mA, 12V special application
- Maximum number of keypads: 15 maximum wiring length for each run (#22AWG): 1000’ divided by total number of keypads & EZMs on run
- Keypad Dimensions: 4 3/8” x 5 7/8” x 1 1/6” (HWD); 11.1cm x 14.9cm x 2.7cm (HWD)
Specifications for Napco Security Alarm NAPGEM-X255
Other SpecsAlternate Codes | 134466, GEM-X255, GEMX255 |
Category | Access Control, Alarms & Intercom, Burglar Alarms, Control Panels/Keypads |
Part Type | Control Panel |