Seco-Larm

The Enforcer wireless entry alert system is a self-contained easy-to-install alert system for commercial or home applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a speaker installed up to 328ft (100m) away. Range may vary depending on the installation and operating environment. An additional speaker may be installed to alert more than one area on the property.

Features:

• For monitoring a driveway or use as an entrance indicator
• No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
• Weatherproof IR photoelectric beam sensor for outdoor use
• Speaker makes "ding-dong" or siren sound if beam is interrupted
• Speaker volume can be adjusted or turned off
• When in siren mode, sounding time is adjustable from 3~30 seconds
• Connect additional speakers to the sensor wirelessly (one speaker included)
• Includes the following:
• Weatherproof wireless reflective sensor (Tx)
• Wireless speaker (Rx)
• Reflector
• Two power adapters
• Three mounting brackets: One each for the sensor, reflector, and speaker

Specifications:

• IP Rating: Sensor only: IP55 weatherproof
• Type: Wireless weatherproof entry alert system
• Operating Frequency: 433.92 MHz
• Operating voltage: Sensor and speaker- 12VDC (adapter included)
• Range: Sensing- Up to 22ft (7m), wireless- up to 328ft (100m)
• Operating Temperature: 32º~122º F (0º~50º C)
• Current Draw: Sensor- active: 20mA, standby: 5mA; speaker- active: 100mA, standby: 25mA
• Light Source: IR LED
• Speaker Volume: 0~90 dB
• Alarm Time Range: 3~30 s (adjustable)
• Dimensions: Sensor- 3-1/4″ x 2-9/16″ x 1-1/2″ (82 x 65 x 37mm), speaker- 3-1/4″ x 2-15/16″ x 1-9/16″ (83 x 75 x 40mm), reflector- 2-3/8″ x 2-1/16″ x 3/8″ (60 x 52 x 9mm)
• Speaker Output: Chime/off/alarm (selectable)

Accessories:

• E-931ACC-CQ: Entry alert system and counter
• E-931ACC-HR1Q: Hood for photoelectric beam sensor reflectors
• E-931ACC-SFQ: Additional wireless speaker
• E-931ACC-BLS8Q: Wall mounting bracket for IR photoelectric beam sensors
• E-931ACC-R2Q: Square reflector for photoelectric beam sensors
• E-931ACC-RC1Q: Round reflector for photoelectric beam sensors