Pemko Manufacturing Co

The HS series half surface continuous geared hinge is designed mainly for retrofit work and is applied to the exposed surface of the door and frame rabbet. This hinge allows for adjustments for proper alignment, and is designed for use with hollow metal frames where the insert conforms to SDI specifications for aligning doors and frames.

Features:

• Standard and heavy duty versions available
• Special hinge reinforcements are not required
• For use with hollow metal frames where inset conforms to SDI specifications for aligning doors and frames
• Hollow metal door and frame manufacturers’ standard is acceptable
• Allows for adjustments to properly align the edge of the door to the frame
• Removal of hinge reinforcements in the door and frame is not advised
• Applied to exposed surfaces of the door and frame
• Guaranteed for the life of the opening against defects in material or workmanship
• Wood screws available on request (specify on order)
• Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80
• Frame portion fasteners are #12-24 x 7/16" FHUC, Type C, thread forming
• Fasteners - door portion - a. Thru-bolt - 1/4-20 x 1-5/8". - standard duty hinges - 4 required. - b. Shoulder bolt - 1/4-20 x 1" PCH. - standard duty hinges - 4 required. - c. Pan head self drilling #12 x 3/4"
• Custom lengths available
• Certain door and frame conditions may require an extra 1/32"-1/16" clearance
• Special FirePins are only required on 3-Hour (A-label) assemblies

Specifications:

• Grade: Grade 1
• Hinge Material: Aluminum
• Hinge Mounting Type: Half surface
• Hinge Strength: Heavy weight
• Handing: Non-handed
• Fastener: Teks
• Fastener Type: Self drilling
• Maximum Door Thickness: 2 1/4"
• Minimum Door Thickness: 1 3/4"
• Maximum Door Width: 4'
• Maximum Length: 10'
• Minimum Length: 79"
• Maximum Swing: 180°
• Minimum Hinge Clearance: 1/8"
• Weight: 1.28lbs. per foot

Models:

• HS:
• Hinge Strength: Standard
• Bearing Spacing: 3"
• HS_HD1:
• Hinge Strength: Heavy Weight
• Bearing Spacing: 3"

Options:

• EL-EPTL: Stamped long power transfer 12 wire ElectroLynx
• SER: Serviceable section prep with wires - 4, 8, or 12 wire options available
• ACC: Accessible prep with wires - 4, 8, or 12 wire options available
• QC: ElectroLynx wires with Molex connectors - 4, 8, or 12 wire options available
• PT: Power transfer prep for hinge only - order power transfer unit separately
• FP: Fire pins must be ordered on geared hinges when a 3-hour rating is required
• CM: Concealed monitoring unit for continuous hinges
• DDP: Dutch door prep for continuous hinges
• CUT: Cut charge
• HT: Hospital tip
• ALP: Anti ligature package for continuous geared hinges
• SSHT_ALP: Stainless steel anti ligature package for continuous geared hinges
• TORX: TORX Security screws
• WS: Wood screws

Finishes:

• C - Clear anodized
• D - Dark bronze anodized
• G - Gold powder coat
• BSP - Black suede powder coat
• WSP - White suede powder coat
• SN - Satin nickel powder coat
• 10BE - Dark oxidized satin bronze equivalent