Pro-Lok

Keep a complete tool kit on hand at all times. This 47 piece complete car opening kit contains 5 slim Jim tools, 7 multi-car opening [MCOT] tools, long reach tool and all of our specialty tools along with a selection of wedges. Packaged in a heavy duty deluxe zippered cordura case with divided sections inside and sturdy handles to make transportation easy. Includes our own tool usage and instruction booklet.

Kit Includes:

• AO01: The slide lock opening tool, is actually two (2) tools in one. The Slide Lock tool opens foreign and domestic vehicles with both horizontal locking devices and vertical buttons.
• AO03: The Chrysler car opening tool enters the lock just like a key, works on all Chrysler/Dodge with a cylinder drain hole.
• AO04: The tool is a double sided tool that opens almost any auto gas cap.
• AO07: The astro tool is an extremely useful, double ended car opening tool with a hook and reach designed to open the Chevy Astro or Safari van and several other GM cars.
• AO10: The original slim Jim is still the best for opening cars. The slim Jim design unlocks a variety of foreign and domestic vehicles. Made of stainless steel. 3/4” x 22-1/2” x .032” thick.
• AO11: The super slim Jim is wider and thicker than the original slim Jim. Designed to unlock many foreign and domestic vehicles. Made of stainless steel. 1¼ x 25” x .032” thick.
• AO12: The round Jim is specially designed to unlock vehicles with exposed bell cranks, such as the Volvo 960, S90/V90 or the Porsche Boxter/911.
• AO13: The under the handle car opening tool is designed to push horizontal and vertical linkages accessed behind “pull up” type exterior handles.
• AO14: The 2 pc vent window set allows you to vent windows on cars, trucks, and van doors.
• AO16: The Corvette tool is ideal for opening 1984 – 1994 Chevrolet Corvettes. No wedging required.
• AO17: The Porsche 928 car opening tool is ideal for opening a Porsche 928 on the driver’s door quickly and professionally.
• AO18: The spring “L” tool is one of the most versatile car opening tools. Allows technician to lift and push bell cranks on many car models.
• AO20: The slide Jim car opening tool is a double ended tool, designed to unlock many cars with exposed horizontal lock linkages. The “L” end is used to manipulate bell cranks while the “U” end is used to manipulate horizontal rods with a stepped or offset angle.
• AO21: The Toyota car opening tool is a versatile double ended tool, perfect for unlocking various Toyota or other vehicles with a metal or plastic shield guarding the bell crank.
• AO25: The E-Z Jim is a medium thickness slim Jim designed to unlock a wide variety of foreign and domestic vehicles. Made of stainless steel. 1” x 25” x .042” thick.
• AO26: The versatile GM S-10 car opening tool is designed to unlock 1980 – 1989 model GM trucks, such as the S-10 Blazer and GMC Jimmy, as well as vent windows.
• AO29: This versatile dual tool is actually two (2) tools in one.
• AO30: The 30″ in. Extra long slim Jim is like the original slim Jim, but designed to reach even the deepest linkage. Made of stainless steel. ¾” x 29½ ” x .032” thick.
• AO31: The button lifter multi-car opening tool (MCOT) is designed to reach under windows to unlock vehicles with raised vertical buttons. Simply remove the protective cap and use the precision ground tip.
• AO32: The versatile wide extra long multi-car opening tool (MCOT)is designed to have a wide reach and extra long length for use on multiple cars with locking mechanisms that were just out of your reach.
• AO33: The separator multi-car opening tool (MCOT) with precision ground tip may be used to access a variety of vehicles where the inner panel deflector inhibits entry or weather stripping is tight.
• AO34: The narrow tool is the ‘original’ multi-car opening tool (MCOT), designed to go under the window and inside the car to unlock the door.
• AO35: The wide tool is a multi-car opening tool (MCOT) is designed to access a variety of vehicle types with wide door panels.
• AO36: The long multi-car opening tool is designed to stretch under the window of a variety of vehicle types for hard to reach activators.
• AO37: The button finger multi-car opening tool (MCOT) is modified to operate the vertical buttons on various foreign and domestic vehicles. Remove the protective cap to use the precision ground tip.
• AO38: The Honda tool (double ended hook and lift tool) is designed to make opening foreign and domestic vehicles with a horizontal or vertical linkage super easy.
• AO39: The double slide tool is a multi-functional tool with a short reach for narrow doors and a reverse tip for reaching under horizontal linkage.
• AO40: The versatile GM “L” car opening tool allows technicians to lift and push bell cranks on many GM model vehicles.
• AO41: The versatile, double ended behind the glass car opening tool is designed to gain vehicle access to horizontal linkage located above and behind the glass.
• AO42: Across the car entry tool. Allows you to reach inside a car to an activator on the opposite side of the car or to retrieve the keys. Extends up to 76” with use of middle section.
• AO42SL: Plastic sleeve that works with any tool to protect the glass, weatherstripping and edge of the door while the tool is in use.
• AO43: The double sided back-flip car opening tool is designed to reach above and behind the plastic guard plates on foreign and domestic vehicles.
• AO44: The versatile Camry/Lexus car opening tool has a double sided design for opening Toyota Camry and the rear door of the Lexus LS 400 sedans.
• AO45: The unique double ended Loop D-loop™ car opening tool offers a new approach to lockouts on foreign and domestic vehicles. Fed in under the window, the ‘loop’ is fixed around the straight or mushroom style button head and pulled tight, then lifted up to unlock. The heavy duty coated wire is securely crimped.
• AO47: The Cruiser/compressor car opening tool features a tip with two sides. The short end opens Land Cruisers and Lexus LX450. The long end opens the Mercedes SLK 230 compressor.
• AO48: The Audi A6/A8 tool is a double sided car opening tool with modified “L” end used to open an Audi A6 (or some Pontiacs) while the “U” end is used to open the Audi A8.
• AO49: The versatile double “L” car opening tool is designed to open GM “dustbuster” minivans including: the Oldsmobile Silhouette, Chevy Venture, Pontiac Montana, and more.
• AO84: The GM Camaro car opening tool is specially designed to unlock most Chevrolet models, including the Camaro, but also works on some Pontiac, Saab, and Toyota vehicles.
• AO85: The euro strip tool has a flexible design which allows technicians to bypass doors on foreign and domestic vehicles. Machine cutout with a heavy duty rubber band for extra strength.
• AO86: The lock lifter tool makes unlocking vehicles easy. With the use of Pro Lok’s pump wedge, the lock lifter tools is inserted into the passengercompartment to lift vertical buttons or lock knobs.
• AO95: The 52 page tool usage and Instruction booklet is a great resource for understanding different auto locking systems and how to use our tools for car openings. Keep on hand for most car opening situations.
• AO56: The deluxe zippered case is made from heavy duty cordura, featuring sturdy handles, four (4) storage compartments, and a full length zipper. The center panel divider keeps wire tools in place with a hook-n-loop “tool positioners”, enabling you to arrange your tools in almost any layout. Size 30-1/2 ” x 8” in. Tools not included.
• AO60: The red double-sided wedge is made of high impact plastic to assist in expanding car openings in order to unlock vehicles. The varying height design on each side (1/2″ and 3/4″) allows technician to adjust to doors with varying flexibility.
• AO61: The grey rubber wedge is made from heavy-duty, non-marking high grade rubber to assist in expanding openings in order to unlock vehicles.