Rixson 27 Series Heavy Duty Offset Floor Closer

Features:

• Built-in positive dead stop prevents door from swinging beyond the desired opening degree (specify 85-deg, 90-deg, 95-deg, 105-deg)
• Separate and independent valves for closing speed, latch speed and backcheck
• Available non-hold open (N) or selective hold open (S) at same degree as dead stop
• Delayed action option-prefix "DA" (Non-hold open closers only)
• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix "PH". (For 8-1/2 lbs. of opening force prefix PH and suffix 8-1/2 lbs.)
• Cold weather fluid available – specify "CWF" (not available for closers with "DA")
• Sealed closer option – specify "SC"
• Available with floor plate or threshold installation (floor plate shown)
• Available 1-1/2" offset, for doors with 3/4" cladding or frames with applied molding, maximum door weight 250 lbs.
• Cycolac, rust-proof cement case
• Vertical door adjustment
• Standard top pivot: #180 included
• For arch top doors or applications when the 180 top pivot cannot be used, supply at least two each M190 load-bearing intermediate pivots, mounted together at the top of the straight vertical edge
• Intermediate pivot(s) required: M19 (order separately)
• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• For fire rated openings (up to 3 hour assemblies) prefix "F". This package will be supplied with a steel top pivot (F180) and a non-hold open closer. Intermediate pivot required: FM19 (order separately)
• UL listed closers cannot have PH option
• For 20-minute labeled doors suffix "-20" to the part number
• Furnished with wood and machine screws
• Extended spindles available in 1/2" increments up to 2" longer than standard

Applications:

• Single Acting, Handed
• Exterior or Interior Doors
• Weight to 450 lbs.
• Door Width up to 4'0" (1219mm)

Finishes:

• 605 - Bright Brass
• 606 - Satin Brass
• 611 - Bright Bronze
• 612 - Satin Bronze
• 613 - Oil Rubbed Bronze
• 613E - Dark Oxidized Satin Bronze, Equivalent
• 618 - Bright Nickel
• 619 - Satin Nickel
• 622 - Flat Black
• 625 - Bright Chrome
• 626 - Satin Chrome
• BSP - Black Suede Powder Coat
• WSP - White Suede Powder Coat