Power Supply/Charger Board and Plug-in Transformer (TP1640), Converts 16-28VAC to Single Output, 6/12VDC @ 2.5A, BC100 Enclosure
Part#: ALXSMP3ET
Hot#: 178394
Mfg: Altronix
Available: 99+ ( 16 DAL, 63 KAN, 9 LA, 15 PHX, 10 SAC, 6 SEA )
Notice: The info below is not item specific.
Altronix Power Supply / Charger Kit
SMP3ET power supply/charger converts a low voltage AC input into a 6VDC or 12VDC output. This unit has a wide range of applications for access control, security and CCTV system accessories that require additional power.
Specifications:
- Input:
- 16VDC from TP1640 plug-in transformer.
- Output:
- 6VDC or 12VDC selectable output.
- 2.5A continuous supply current.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- Battery Backup: (Batteries sold separately)
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Battery short circuit protection (circuit breaker).
- Visual Indicators:
- AC input and DC output LED indicators.
- Temperature:
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: 20° C to 70° C ( 4° F to 158° F).
- Relative Humidity: 85% +/- 5%
- BTU/Hr. (approx.): 6VDC: 8 BTU/Hr.; 12VDC: 15 BTU/Hr.
- System AC input VA requirement:
- 6VDC/12VDC: 276VA.
Specifications for Altronix ALXSMP3ET
Other Specs| Alternate Codes | SMP3ET |
| Category | Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies |
Helpful Links
x
Power Supply/Charger Board and Plug-in Transformer (TP1640), Converts 16-28VAC to Single Output, 6/12VDC @ 2.5A, BC100 Enclosure: #ALXSMP3ET