IML Security Supply
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Passage Anti-Ligature Clutched Lever Lockset, 2-3/4in Backset, ANSI Strike, Grade 1, 630/US32D Stainless Steel

Part#: MAR195SSN/32D
Hot#: 173826
 Finish: Satin Stainless Steel

Available: 25 ( 13 DEN, 6 KAN, 6 STX )

Latch by lever either side.


  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Marks USA 95 Line Survivor Series


The Grade 1 Survivor is supplied with 6 pin cylinders in Marks "C" keyway with 2 nickel-silver keys. The retractor is cast stainless steel with bronze roller bearings for ultra-high strength, smooth operation & long life. When locked, the Survivor’s clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with Rigid levers are prone to failure because of excessive torque.

  • Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value
  • Life tested over 6 million cycles; Fully operational after these tests
  • Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting
  • Only two thru-bolts for easy installation
  • Breakaway handles (American & Crescent design) protect against excessive abuse

Features:

  • Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional
  • Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose
  • Levers: Solid cast Zamac w/ 1/2" return
  • Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts
  • Strike: #1135, 4-7/8" ASA curved lip
  • Door thickness: 1-5/8" to 1-7/8" (For 1-3/8" door use K1704 spacer.)
  • Cylinder: Marks C keyway, 6 pin w/ 2 keys or IC Core housing
  • Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier; 24V/DC, .21 Amps
  • 12V/DC Optional, Contact factory for additional options
  • Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset)
  • Features "The Clutch"
  • UL Listed, 3 hour fire rated

Functions:

  • Passage
  • Privacy
  • Patio
  • Communicating
  • Entry
  • Exit
  • Classroom
  • Storeroom
  • Institution
  • Vestibule
  • Corridor
  • Store Door
  • Hospital/Privacy
  • Service Station Lock
  • Classroom Intruder
  • Dummy Trim Outside
  • Full Dummy Trim
  • Communicating Passage
  • Communicating Storeroom
  • Communicating Classroom

Specifications for Marks Hardware MAR195SSN/32D

Specifications
ManufacturerMarks USA
Other Specs
Alternate Codes195SSN/32D, 195SSN32D
Backset2-3/4"
CategoryCommercial Locks, Hospital/Anti-Ligature Lever, Lock Sets
CertificationsA156.2, ANSI, BHMA, UL Listed 3 Hour
Cylinder TypeConventional
Door ApplicationLock Sets
Door Thickness1-3/4"
Faceplate Height2-1/4"
Faceplate Width1-1/8"
Fasteners#10 Thru-bolts
Finish Code630
Finish ColorSatin Stainless Steel
Fire RatedYes
Fire Rating180 min
FunctionPassage
GradeGrade 1
Latch Throw1/2"
Latchbolt TypeDeadlatch
Lever DesignSolid Cast
Lock CategoryInstitutional Life Safety Cylindrical Locksets
MaterialStainless Steel
Mechanical OptionFree Motion
MountingThru Bolt
Rose/EscutcheonLever Recessed Rose
Series195SS LifeSaver
Strike Type4-7/8” ASA Curved Lip Strike