Securitron

The XMS is a passive infrared motion detector specifically designed to release a magnetic lock from the inside for free egress. Unlike burglar alarm type detectors, the XMS has special features appropriate to this use. The lock control function is fail safe so that the magnetic lock will safely release if power is cut to the detector. A relay is also present to send a REX (request to exit) signal to an access control system (if one is present) and therefore shunt an alarm report. A time extension feature avoids the problem of the unit resetting if a person momentarily stops moving just before exit. Tight control of the exit detection pattern allows maximum security from the outside and avoidance of inadvertent activation from the inside. Since egress from a magnetically locked door can be a safety issue, make sure you are complying with local building codes. Contact your building and/or fire prevention department.

Features:

• Passive infrared request to exit device
• Designed to reliably release magnetic locks
• Automatically cuts power to the lock, allowing the individual to exit without even realizing that the door is secured
• Request to exit (REX) output
• Easily adjustable beam pattern
• Adjustable time relock
• UL Listed
• MagnaCare® lifetime replacement, no fault warranty
• Part of a continuum of Safer2Open low-touch and touchless door hardware solutions from ASSA ABLOY

Specifications:

• Max Current 12v DC (mA): 50
• Max Current 24v DC (mA): 50
• Switch: SPDT - Single pole double throw
• Maximum Operating Temperature (°F): 110
• Minimum Operating Temperature (°F): 32
• Weather Resistance: Indoor use only
• Height (in): 1.75" [44mm]
• Width (in): 7" [178mm]
• Depth (in): 1.87" [48mm]
• Certifications: CAL Fire, 3774-0923:0104