Von Duprin

GUARD-X exit alarm lock readily identifies the door on which it is mounted as an emergency exit and secures the opening against unauthorized use. It is ideal for deterring theft in restaurants and retail establishments such as: discount stores, grocery stores, drug stores, clothing stores and sporting goods stores. The new series 2670 exist alarm lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1-1/4 (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.

Features:

• Non-relatching deadbolt means alarm will continue until disarmed by key
• English with Braille is standard, but also available in French or Spanish
• Quick installation with an easy to use adhesive back template
• Cylinder may be required. Must be ordered separately.

Heavy-Duty Design:

• The new series 2670 exist alarm lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1-1/4 (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.

Operation and Outside Trim:

• GUARD-X is armed and disarmed by key, using a standard rim cylinder. For owner convenience, it can be operated from the building exterior by a standard rim cylinder, so an authorized user can easily arm and disarm it to enter or exit the building when required. When using exterior operation, a pull trim is recommended, use 210DT or 230DT. Rim cylinders are not furnished and must be ordered separately. A standard 9-volt battery powers the alarm. An exterior 9-volt power supply is available, Model PT-790, a 120VAC plug-in. When using the external power supply, the 9-volt battery functions as a battery backup during a power failure.

Security:

• GUARD-X does not allow relatching or resetting the alarm after an unauthorized exit, other than by an authorized person with a key. A 100-decibel alarm provides a clear, attention-getting warning for an unauthorized exit or attempted exit. The armed indicator light informs the owner that the alarm is armed, and an audible low-battery alert signals the owner to replace the battery when necessary.

Compliance:

• GUARD-X complies with the NFPA 101 life safety code “the actuating portion of which extends across at least one half of the door leaf.” It is UL listed for panic exit hardware (UL305) including the ends of the crossbar or push pad shall curve, guard, or are otherwise designed to prevent catching on the clothing of persons during exit” for use on emergency exit applications, and tested in accordance to ANSI A156.3 grade 1 panic hardware (250,000 cycles). Installation takes just a few minutes with an easy-to-use adhesive back template. The product’s non-handed design means the installer can mount it for either hand by just removing and reversing the “emergency exit — alarm will sound” sign built into the device. The standard warning sign is in English with Braille; French and Spanish are available.

Dimensions:

• Touchbar Height to Finished Floor: 40˝ (1016mm) at center
• Door Width Range: 36˝ (914mm) to 48˝ (1219mm)
• Touchbar Projection:
• Neutral 4-1/8˝ (103mm)
• Depressed 2-3/4˝ (70mm)
• Latch Case Housing: 7˝ (179mm) x 4-1/16˝ (103mm) x 4-1/8˝ (105mm)
• Device Length: 32-1/2˝ (826mm

Finishes:

• US28/628 - Aluminum
• 313AN/710 - Duranodic Brown
• 315AN/711 - Black