IML Security Supply

Part#: ADR2190-411-302-32D
Hot#: 155674

  • Overview
  • Specifications

Adams Rite Dual Force® 2190 and 2290

Interconnected Deadbolt/Deadlatch and Narrow Backset Mortise Lock

The Dual Force® 2190 Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.

The Dual Force® 2190 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only, while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors.

Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release.

    • Field-selectable inter-connection feature allows interior trim to retract deadbolt and deadlatch. Consult local building officials for guidance in code compliance. Retrofits to existing MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same backset. 1-3/4" minimum door thickness required.
    • 1-1/8" or 1-1/2" only.
    • Latchbolt: 5/8" throw of solid brass. Easily reversible using only a screwdriver.
    • Deadbolt: 1" throw of stainless steel.
    • Stainless steel. Deadlocks latchbolt to prevent "loiding" or case-knife entry.
    • Measures 1" x 6-7/8". Include FaceStyle faceplate system that adapts to flat, radius, or beveled door edge. Radius with weatherseal faceplate available separately.
    • Standard strike furnished is the 2101-01 for flat jamb where door closes flush or nearly flush. The 2101 covers MS® Deadlock strike preparation with modification, and the 4901 Deadlatch strike directly. Also available in radius version for opposite stile pairs of doors and with extended lip strikes for special jamb conditions.
    • The Dual Force 2190 is operable by any standard 1-5/32" diameter mortise cylinder with MS® cam. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.
    • Specify trim option, lever style, finish, and strike. Also adapts to paddle operator 4591. See 2290 for wood or steel door version for stile and rail type door construction. Note that the low profile trim (trim option 3) is recommended for in-swing door applications. Please refer to 3080 (TRIM) for full offering of designer handle sets.
    • Order 2190 Electrification Kit EK-2190 for adding to the clutched exterior lever. Dual voltage 12/24 VDC rated for continuous duty operation. Energizing the lever allows exterior lever to be turned to retract latch only. The electrified option is not available for low profile trim (trim option 3).
    • Individually boxedwithtrim as specified, strike and machine screws for mounting. Cylinders available separately. Shipping weight: 2 lbs.

Specifications for Adams Rite Manufacturing ADR2190-411-302-32D

Other Specs
Alternate Codes2190-411-302-32D, 219041130232D
Door Bore Size2-1/8"
Door Thickness Min1-3/4"
Finish ColorSatin Stainless Steel
FunctionDeadbolt, Deadlatch
GradeGrade 1
HandingField Reversible
Knob/Lever DesignRound
Knob/Lever StyleLever
Latch Bolt Face TypeConnectivity
Latch Bolt Faceplate Size6-7/8" x 1"
Latch Bolt Throw1", 5/8"
Latch Bolt TypeDeadbolt, Deadlatch
Lock CategoryMortise Lock
Series2190 Series
SupplierAdams Rite