Alarm Controls Corporation

The SREX-100 is an active infrared request to exit sensor for interior applications located within the protected premise. It is U.L. listed as a request to exit device under the U.L. UL294 and the CAN/ULC-S319 standard. The SREX-100 is rated a “class 1” as per the CAN/ULC-S319 standard. The SREX-100 is designed to mount over the door header so that its detection pattern is placed directly over the door handle. When the user reaches for the door handle the exit device releases allowing the person to exit. The active detection curtain is well defined to keep the door secure while rejecting parallel traffic and objects placed under it.

Features:

• Narrow activation zone is limited to door handle area (range 28" to 48")
• Designed to eliminate cross-traffic activation
• Cannot be deceived by placing objects under door
• Immune to thermal changes
• Adjustable time delay from 1 to 60 seconds
• Built-in buzzer, can be silenced if required
• Request to exit input, keypad or card reader input
• Part of a continuum of Safer2Open™ low-touch and touchless door hardware solutions from ASSA ABLOY

Specifications:

• Electrical:
• Contact Rating: 2A contacts; rated at 1.3A at 30 VDC or 24 VAC
• Current (mA): 155
• Door Position Switch: Normally open dry contacts
• Input Operating Voltage: 12 or 24 VAC or VDC, auto sensing
• Switch: 1 DPDT- Double Pole Double Throw
• Environmental:
  • Maximum Operating Temperature (F) : 120
  • Minimum Operating Temperature (F) : 32