
Power Supply/Charger Board Only, Output 12VDC @ 10 Amp Access, Single Filtered and Electronically Regulated Output, Input: 115VAC, LED Visual Indicators
Part#: ALXAL1012ULXB
Hot#: 178366
Mfg: Altronix
Available: 52 ( 4 DAL, 3 DEN, 19 KAN, 2 LA, 2 LV, 4 PHX, 4 SAC, 2 SEA, 8 SLC, 4 STX )
Notice: The info below is not item specific.
Altronix Multi-Output Access Power Controller
AL1012ULXB UL Listed Sub-Assembly power supply/charger converts a 115VAC, 60Hz input into a single 12VDC non power-limited output. It also offers a suite of features that includes AC fail supervision, battery presence, and low battery supervision.
Specifications:
- Input Voltage:
- Input 115VAC, 60Hz, 2.6A.
- Input fuse rated @ 5A/250V.
- Output:
- 12VDC output.
- 10A continuous supply current.
- Output fuse rated @ 15A/32V.
- Filtered and electronically regulated output.
- Short circuit and thermal overload protection.
- Battery Backup:
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Supervision:
- AC fail supervision (form "C" contacts)
- Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
- Low battery supervision (form "C" contacts).
- Battery presence supervision (form "C" contacts).
- Visual Indicators: AC input and DC output LED indicators.
- Electrical Temperature:
- Operating: 0° C to 49° C (32° F to 120° F).
- Storage: - 20° C to 70° C ( - 4° F to 158° F).
- Relative Humidity 85% +/- 5%.
- BTU/Hr (approx.): 61 BTU/Hr.
- System AC input VA requirement: 299VA.
Specifications for Altronix ALXAL1012ULXB
Other SpecsAlternate Codes | AL1012ULXB |
Category | Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies |