AWID

The KP-6840 proximity card and keypad reader is a switch plate-type reader combined with a 12-key numeric keypad, in a unit that fits on a single-gang box. Read range with cards is up to 8in. The keypad may be used for pin entry, programming a controller, enrolling card codes, and general data entry. The KP-6840 reader is designed to fit perfectly on a single-gang electrical utility box. The metal-compensation that is built into every KP-6840 reader assures minimal loss of read range when the reader is mounted on a metal surface. The KP-6840 reader also can be fastened by 2 screws on any wall or other surface.

Features:

• Read range of 6 to 8in
• Pin pad for dual verification
• Specially designed for an attractive appearance
• Electronics potted with epoxy compound for demanding environmental applications
• LED for visual feedback, Piezo beeper for audio feedback
• Compatible with all Wiegand access control systems
• Industry standard Wiegand output and RS-232 interface
• Attractive high-tech enclosure in dark gray
• Tri-state LED
• Ease of use and entry. Assures long life of cards by eliminating need to physically swipe card against reader
• For high security applications
• Elegantly and beautifully mounted
• Reader electronics protected against application elements to assure long reader life
• Visual and Audible indicators providing dependable user feedback and guidance for quick and easy installation
• Wiegand output allows use of multiple control panels allowing stocking of one reader for all applications and credential requirements

Specifications:

• Reading Distance: With cards – up to 8in (20 cm) (varies with mounting or housing, voltage applied to reader, and credential type)
• Reader Excitation Frequency: Transmit and receive - 125 kHz
• Antenna Output: Omni-directional low-frequency RF field
• Indicators (Control by Reader and Panel): LED – 3 colors, red-amber-green. Beeper – piezo-electric, 4 kHz tone
• Power Supply: +5 volts to +12 volts DC, linear, regulated. Current rating: 200 mA or more
• Communication Protocols: Wiegand electrical interface (for reader & keypad) RS-232 serial interface (for reader only)
• Code Format – Keypad: Select 26-bit, or 4-bit or 8-bit bursts
• Cable (for Wiegand Interface): 4 to 7 conductors (not twisted pairs), stranded, 22 gauge, color-coded, overall 100% shielded, plastic jacket, up to 500 ft.
• Dimensions: 4.6 x 3.1 x 0.88 inches (11.7 x 7.9 x 2.2 cm)
• Weight: 8 ounces (227 g)
• Material: ABS 2-part enclosure, dark gray only. Epoxy resin potting on reader electronics
• Cable (Integrated with Reader): 10 conductors, 22 gauge, 18in long. Overall shielded, gray plastic jacket
• Mounting: Single-gang utility box, wall, cabinet
• Operating Temperature: -31˚F to 150˚F (-35˚C to 65˚C)
• Operating Humidity: 0% to 95% non-condensing
• Protection from Environment: Use Lexan housing when reader must be away from moisture, sunlight, view or damage.
• Avoiding Interference: Optimize reader performance by spacing or shielding reader from neighboring readers, including reader on other side of wall at door.