IML Security Supply
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
300lbs, 1-1/2in Center Hung Pivot Set, Non-Handed, Grade 1, 626/US26D Satin Chrome

Part#: IVE7253SET US26D
Hot#: 178787
Mfg: Ives

Contact an IML Representative for Details

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Ives


Ives offers a complete line of 3/4" offset, 1-1/2" offset, center hung, intermediate, pocket and power transfer pivots with all exposed parts made of brass or stainless steel for maximum corrosion resistance. The offerings include high strength brass and stainless steel forgings, as well as castings for fire-rated and non-rated doors, combined with precision bearings for smooth operation. The positive locking vertical adjustment mechanism allows the installer to precisely position the door and balance the load.

Features:

  • Maximum door load 300 pounds
  • Recommended for use with 1-3/4" minimum door thickness
  • Not recommended for doors larger than 4'0" X 8'0"
  • Easy installation, tilt on bearing and bearing pin
  • Adjustable floor to door clearance 3/16" to 3/4"
  • Vertical adjustment range 3/16", with positive locking
  • Non-handed
  • Consists of 7253 top header mount and 7253 Btm base plate mount
  • Meets ANSI/BHMA A156.4 C07032
  • UL Listed, 20 minute fire doors
  • Fire rated models not available in US26 and US26D (brass). US32 and US32D (stainless) is available.
  • Non-Rated models not available in US32 and US32D (stainless). US26 and US26D (brass) is available.
  • 7253 Set (7253 top and 7253 Btm)
  • 7253 Top (7253-7255-7255J-7256 top), header mount
  • 7253 Btm (7253 Btm), base plate mount

Specifications:

  • Material substrate: Made from cast brass
  • Certifications: Meets ANSI/BHMA A156.4 C07032
  • Dimensions: Radius stop (A) to clear heel of door edge.
  • Dimensions: Pivot distance (B) 1-3⁄4" (44mm) minimum from jamb to centerline of pivot pin. Radius heel edge of door, 1-5⁄8" (41mm) minimum recommended.
  • Dimensions: Clearance from bottom edge of door to floor mounting surface is adjustable from 3⁄16" (5mm) to 3⁄4" (19mm) by varying the depth of the mortise (C) in the bottom of the door. Consult product support when clearance is over 3⁄4" (19mm).

Finishes:

  • 605/US3 - Bright brass
  • 606/US4 - Satin brass
  • 612/US10 - Satin bronze
  • 613/US10B - Oil rubbed bronze
  • 619/US15 - Satin nickel
  • 622/BLK - Matte black
  • 625/US26 - Bright chrome
  • 626/US26D - Satin chrome
  • 643e/716 - Aged bronze
  • 689/SP28 - Aluminum painted
  • 691/SP10 - Bronze painted
  • 695/SP313/US10BE - Dark bronze painted
  • 706/SP4 - Brass painted

Specifications for Ives IVE7253SET US26D

Other Specs
Alternate Codes7253SET-US26D, 7253SETUS26D, IVE7253SET-US26D
CategoryHinges, Pivots