Command Access

The PD10-M series is a motorized latch pullback grade 1 storefront exit device that retrofits First Choice 3600/3700 & Dor-o-matic 1600/1700 series. All PD10-M models are equipped with our PTS “push to set” technology. We know that door conditions change and in retrofit scenarios you never know exactly what you’re walking into. But with our 1 touch PTS adjustment your post installation adjustment is a breeze. Install this device with the confidence of knowing that the PD10-M meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle “ warranty.

Features:

• Next Generation MM5 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
• “PTS”: 5 second electronic adjustment for easy post installation adjustment
• Electric dogging rated for continuous duty - auto re-engage if push pad is pulled from dogged position
• Low current draw - field switchable to a “low current” or “high torque” mode
• Up to 300’ wire run with 2-18ga wire - long wire runs provides installer with convenience of placing the Command locking hardware power supply in a centralized location; i.e. the same closet as the access control panel
• 6’’cable with robust quick Molex connect for MM5 module to 6’ power lead to easily connect to power supply
• UL listed
• 3 Year no hassle warranty
• Electric motor driven latch pullback
• Quiet, fast, smart, & durable
• Exact retrofit for Dor-o-matic 1600/1700 or First Choice 3600/3700
• ANSI/BHMA A156.3 Grade 1 UL narrow stile storefront rim & CVR exit devices
• Tested to 4 times industry standard - reliable & high performance exit devices

Models:

• PD10-M-RIMA: Complete rim exit device, non-handed, motorized latch pullback, w/electronic dogging. Aluminum finish
• PD10-M-RIMD: Complete rim exit device, non-handed, motorized latch pullback, w/electronic dogging. Duronatic finish
• PD10-M-CVRA: Complete CVR exit device, non-handed, motorized latch pullback, w/electronic dogging. Aluminum finish
• PD10-M-CVRD: Complete CVR exit device, non-handed, motorized latch pullback, w/electronic dogging. Duronatic finish

Specifications:

• Operating Voltage: 24 TO 28 VDC
• System Protection: Unit shutdown when voltage exceeds 28VDC
• Standard: Average current peak 1.3A,
• Average Current Hold: 180MA
• Torque: Average current peak: 2A, average current hold: 250MA
• PTS Adjustment: Approx. 1/4”
• Materials: push bar made of extruded aluminum, anodized in finish specified.
• Push bar Length: dimensioned for 36” and 48” doors.
• Door Height (for CVR): 7’ standard; designate 8’ or 9’ optional height when ordering
• Door thickness: suits standard 1-3/4” thick aluminum, stile and rail doors
• Stile Width: Minimum 2” stile required. Fits medium and wide stile doors as well.
• Stile Wall: minimum 1/8” required for installation
• Dogging: Electronic dogging is standard with motor technology – push bar stays retracted when dogged.
• Fasteners: all provided
• Cylinders: not provided. Install rim cylinder by others.