Marks USA 95 Line Survivor Series

The Grade 1 Survivor is supplied with 6 pin cylinders in Marks "C" keyway with 2 nickel-silver keys. The retractor is cast stainless steel with bronze roller bearings for ultra-high strength, smooth operation & long life. When locked, the Survivor’s clutch disengages the outside lever allowing it to turn freely without opening the latch. This reduces the torque applied to the outside lever. Other locksets with Rigid levers are prone to failure because of excessive torque.

• Withstands torque of 1800 inch-pounds; over twice ANSI/BHMA (1996) test value
• Life tested over 6 million cycles; Fully operational after these tests
• Thru-bolting with #10 epoxy coated bolts assures vibration-proof mounting
• Only two thru-bolts for easy installation
• Breakaway handles (American & Crescent design) protect against excessive abuse

Features:

• Backset: 2-3/4"; 2-3/8", 3-3/4" & 5" Optional
• Latch #1834, Front: 1-1/8" x 2-1/4"; Throw: 9/16"; Stainless steel nose
• Levers: Solid cast Zamac w/ 1/2" return
• Rose: Thru-bolted, 3-7/16" dia., spring loaded 2-#10 thru-bolts
• Strike: #1135, 4-7/8" ASA curved lip
• Door thickness: 1-5/8" to 1-7/8" (For 1-3/8" door use K1704 spacer.)
• Cylinder: Marks C keyway, 6 pin w/ 2 keys or IC Core housing
• Electrified functions - 100% duty cycle, 24V/AC supplied with bridge rectifier; 24V/DC, .21 Amps
• 12V/DC Optional, Contact factory for additional options
• Request to Exit Switch: Single pole, double throw, 3 amp,125 AC, wired either normally open or normally closed (REX Switch is not standard on electrified leverset)
• Features "The Clutch"
• UL Listed, 3 hour fire rated

Functions:

• Passage
• Privacy
• Patio
• Communicating
• Entry
• Exit
• Classroom
• Storeroom
• Institution
• Vestibule
• Corridor
• Store Door
• Hospital/Privacy
• Service Station Lock
• Classroom Intruder
• Dummy Trim Outside
• Full Dummy Trim
• Communicating Passage
• Communicating Storeroom
• Communicating Classroom