Rixson Model 147 Offset Pivot Set

Features:

• Standard top pivot 180 included
• M19 intermediate pivot required (order separately)
• Bottom pivot mounts directly to floor
• Uses same arm and cap as 27 floor closer
• Available for fire door assemblies up to three hours (ferrous material) – specify F147. Intermediate pivot required by UL. Specify FM19 (order separately)
• For 20-minute label suffix –20 to the part number
• Non-ferrous base material
• Doors 60in (1524mm) to 90in (2286mm) in height should use one intermediate pivot. Each additional 30in (762mm) of door height warrants another intermediate pivot
• 3/4in (19mm) offset (measured from centerline of pivot to face of door)
• Available for 1-1/2in (38mm) offset (door weight 350 lbs.) for doors with cladding or frame molding
• Door edges must be beveled 1/8in in 2in
• Furnished with wood and machine screws
• Extended spindles available in 1/2in (13mm) increments up to 2in (51mm) longer than standard
• Doors will swing 180°, trim permitting

Application:

• Exterior or Interior Doors
• Weight to 600 lbs.
• Door Width up to 4'0" (1219mm)
• Handed
• Standard-Duty Pivot Set