IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
2-Doors, E1 Enclosure, Mercury-Compatible Backplate, 75W Single Voltage Power Supply, 8 Output Auxiliary Distribution Module - Class 2 Power Limited

Part#: LSIFPO75-D8PE1M
Hot#: 200138

Available: 3 ( 2 KAN, 1 SEA )

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Lifesafety Power Inc


Mercury Unified Power systems combine system power, lock power and distribution alongside Mercury Security LP series access hardware in one compact and secure UL Listed solution. Solutions are available from 2 to 24 doors, in single or dual voltage, standard or network managed. MCLASS unified power systems combine Flexpower power modules alongside Mercury Security access hardware in one compact and secure UL listed solution. The FPO power supply / battery charger provides two power outputs user selectable for 12 or 24 VDC. One output provides continuous output power for system use, the second is resettable output power, activated when the fire alarm disconnect is initiated. For access or lock power, the D8P provides eight class 2 power limited outputs rated at 2.5A per output, each individually programmable for constant output or FAI disconnect. MCLASS enclosures are painted steel with removable backplate and include lock, two (2) keys and tamper switch.

Features:

  • FPO offline power supply:
    • 120 or 230 VAC input
    • 12 and 24 VDC outputs
    • On board fire alarm interface
    • Continuous and resettable DC
  • Auxiliary outputs:
    • Eight, Class II power limited at 2.5A each
    • Each programmable to either continuous or resettable DC
  • Expansion options:
    • Increased power, multiple voltages
    • Additional distribution outputs
    • Network monitoring and reporting
  • Labor saving design:
    • Pre-wired power section
    • Pre-punched knockouts
    • Removeable backplate simplifies installs
    • Pre-defined hole pattern for power section
    • Access panels mount on threaded standoffs - no drilling required
  • Additional benefits:
    • Wire management room
    • 4.5" enclosure depth fits battery set
    • Tamper switch, lock, dual key set standard
    • Mounting hardware for access boards included

Specifications:

  • Input Power:
    • Input 120/230 VAC 50/60 Hz | 83 Watts (0.69A)
    • Overload and short circuit protection
    • Over temperature protection
    • Polarized AC power supply disconnect
  • Output Power:
    • FPO75: 12V/6A or 24V/3A | 75 Watts
    • Outputs: Continuous (DC1) resettable (DC2)
    • 8 auxiliary outputs, class II power limited rated at 2.5 Amps per output
    • 120 mV output voltage ripple
    • System Efficiency: 83% | System BTU Rating: 33 BTU/Hr
  • Battery Charging:
    • Independent built-in 1A charger for sealed lead acid or gel type batteries
    • Microprocessor dual rate charging of 12 or 24 V battery sets
    • Charges up to 40Ah battery sets within UL limit
    • Automatic switchover to standby battery when AC fails
    • Zero voltage drop when switched over to battery backup
  • Supervision: AC Fail (form "C" contacts) System fail (form "C" contacts) may be triggered by low/no battery, short to earth ground and power supply failure
  • Visual Indicators:
    • AC input, DC1 and DC2 output
    • System fault | AC fault | short to earth ground | reverse battery polarity
    • Fire Alarm Input activated
    • D8P: DC outputs
  • Enclosure Dimensions: Size: 14.00H x 12.00W x 4.50D in. (35.00 x 31.00 x 11.50 cm) | Weight: 14 lbs

Specifications for Lifesafety Power Inc LSIFPO75-D8PE1M

Other Specs
Alternate CodesFPO75-D8PE1M, FPO75D8PE1M
CategoryAccess Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies