Securitron

The PDB-8C1R /8F1R power distribution control interface converts a main non-power limited DC power source to 8 power-limited outputs that can be controlled by a fire alarm control panel. Each output can be selectively set to turn on or to turn off when triggered by the panel. The system can interface to the PDB-8C1R /8F1R with either of two or both supervised trigger inputs.

Features:

• 8 Power limited outputs with auto-resetting
• Circuit breakers for model 8C1R
• Each output is individually selectable to turn on, turn off, or always on when triggered
• Outputs can be triggered with: Voltage or reverse polarity (optically isolated) N/O or N/C switch with supervised EOL
• Form C contacts (triggered) and red LED (TRG) indicate trigger status
• Form C contacts (trouble) and green LED (TRB) indicate: One of the output circuit breakers is tripped main fuse blown or no power on input
• Operates with 12-28VDC; nominal 12-24VDC
• Each output pair has a removable terminal block and green status LED
• Main power has green status LED
• UL Listed sub assembly for access control and burglar alarm systems

Specifications:

• Input Voltage: 12-28 VDC (nominal 12-24 VDC)
• Output Voltage: 11.4 - 28 VDC
• Current with No Load (Typical): 149 - 211mA
• Outputs 1-8 Continuous Dutt: 1A or 2A per output based on model, 10A maximum
• Input Terminal Block Ratings: 5mm spacing 14 -28 AWG
• Output Terminal Block Ratings: 5mm spacing 14 -28 AWG
• Note: 1/4" spacing must be maintained between power limited and non power limited wiring , properly size wire based on load
• Main Fuse Rating: 15A for 2A variant, 10A for 1A variant
• Main Fuse Type: mini-ATO
• Caution: For continued protection against risk of fire, replace only with fuse of the same type and having the same electrical ratings.
• Voltage Trigger Isolation: Optical
• End of Line Trigger: Trips +/- 50% of 2.2kΩ
• Transfer Relay Contacts: 10A for 2 Amp variant / 8A for 1A variant
• Trouble Form C Contacts: 120 VAC 3A/30 VDC 3A
• Triggered Form C Contacts: 120 VAC 3A/30 VDC 3A
• Ambient Operating Temperature: +32 to 120F (0 to 49C)
• Note: The unit shall be installed in accordance with the National electrical code, ANSI/NFPA 70; Canadian electrical code, or any other applicable codes
• Note: For UL compliance the unit shall be installed in a suitable enclosure that is listed to UL 603, UL 294, ULC-S318 or ULC-S533.
• Note: Glass fused variants shall either be powered by a UL 294 or 603 or ULC S318 or ULC S533 power supply with a class 2 output or class 1 wiring must be utilized