IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Proximity Reader Wall Mount

Part#: OSSOS-500
Hot#: 161354
Mfg: OSSI

Please Contact your IML Representative for Details

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

OSSI Overland Safety Systems


The OS-500 proximity reader uses proven digital radio frequency identification (RFID) technology. It can be mounted directly to standard USA-sized single-gang box. The OS-500 standard features include the ability to read OSSI, Farpointe data, HID or AWID proximity cards and tags. Mounting is simplified with horizontal and vertical mounting slots instead of simple holes. This allows the reader to be conveniently leveled and adjusted. To allow both indoor and outdoor operation, the electronics are sealed in tamper resistant epoxy potting.

Features:

  • Mounts to US single-gang wall box or to flat surface. Can be mounted directly on metal with spacer.
  • Quick installation, with only two mounting screws necessary
  • Horizontal and vertical mounting slots standard for alignment
  • Electronics are sealed in weather-and tamper-resistant epoxy potting for both indoor and outdoor operation (industry high IP67 rating)
  • Supports 125-kHz proximity technology
  • Supports OSSI proximity cards and tags.
  • Multi Manufacture Technology: Supports Farpointe data, AWID and HID proximity tags for replacement in any system.
  • Wiegand output standard.
  • External standard four-state LED (red, green , amber, off) and audio tone (beeper) with provisions for both system and local control
  • Comes standard with black and off white bezel contemporary covers to meet any decor.

Specifications:

  • Dimensions and Weight:
    • 4.6” x 3” x 0.4” (166 mm x 77 mm x 10 mm)
    • 4 Oz (113 g)
  • Power: +5 to 14 VDC (12 VDC nominal) 5mA minimal, 45 mA typical, 80 mA peak. Linear power supply recommended
  • Inputs/Outputs:
    • Standard external piezo beeper
    • Standard external four-state LED
  • Read Range:
    • Up to 6 inches (152 mm) for OS-CS-P1X
    • Up to 4 inches (102 mm) for OS-ISO-2PX
    • Up to 4 inches (102 mm) for OS-ISODUO-2SX
    • Up to 3 inches (76 mm) for OS-KT-P3X
  • Operating Temperature: -40 to 65 C, -40 to 150 F
  • Mounting: Can be mounted directly on metal. Cable from the reader can be run up to 500 ft.
  • Certifications: FCC, CE, C-Tick, CSA, UL

Specifications for OSSI OSSOS-500

Other Specs
Alternate CodesESSOS-500, OS-500, OS500
CategoryAccess Control, Prox Readers & Keypads (Wireless), Wireless