Altronix

EFLOW6NB Power Supply Charger, Single Output, 12/24VDC @ 6A, Aux Output, FAI, LinQ2 Ready, 115VAC, Board. UL Listed Sub-Assembly power supply/charger converts a 120VAC, 60Hz input into a single 12VDC or 24VDC output. It also offers a suite of Features that includes fire alarm disconnect, overvoltage protection, and low power disconnect which prevents deep discharge of stand-by batteries.

Features:

• UL Listed For:
• Access Control System Units (UL294).
• Power Supplies for use with Burglar Alarm Systems (UL603).
• Power Supplies for Fire Protective Signaling Systems (UL1481).
• cUL Listed For:
• CSA Standard C22.2 No.205-M1983, Signal Equipment.
• CAN/ULC - s319-05, Electronic Access Control Systems.
• ULC-S318-96 - Power Supplies for Burglar Alarm Systems.
• Also suitable for Access Control.
• Optional Accessories:
• LINQ2: Network Supervision.
• Altronix model LINQ2 Network Communication Module provides remote supervision, control and monitoring over LAN/WAN.
• Remotely reports accurate power diagnostics.
• Controls power and resets devices.
• Reports system diagnostics via Email.

Specifications:

• Input Rating:
• Input 120VAC 60Hz, 3.5A.
• Output:
• 12VDC or 24VDC selectable output.
• 6A continuous supply current.
• Aux. power-limited output rated @ 1A (unswitched).
• Over Voltage Protection.
• Filtered and electronically regulated outputs.
• Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
• Fire Alarm Disconnect:
• Supervised Fire Alarm disconnect (latching or nonlatching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
• Supervision:
• AC fail supervision (form "C" contacts).
• Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
• Battery fail & presence supervision (form "C" contacts).
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 80% of nominal. Prevents deep battery discharge.
• Electrical:
• Temperature: Operating: 0° C to 49° C (32° F to 120° F); Storage: - 20° C to 70° C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%
• BTU/Hr (approx.): 12VDC: 37 BTU/Hr.; 24VDC: 74 BTU/Hr.
• System AC input VA requirement: 420VA.
• Visual Indicators:
• Green AC Power LED indicates 120VAC present.
• AC input and DC output LED indicators.
• Additional Features:
• Short circuit and overload protection.
• Dimensions (W x L x H):
• 4.6"(116.84mm) x 7.5"(190.5mm) x 1.75"(44.45mm).
• Weight:
• Product Weight: 0.8 Lbs. (0.36 kg).