


Slim Wall Plate Wave-to-Open, 12/24VDC
Part#: SECSD-9163-KSQ
Hot#: 172402
Mfg: Seco-Larm
Available: 6 ( 6 SLC )
Notice: The info below is not item specific.
Seco-Larm
The Enforcer outdoor wave-to-open sensor is a full-featured exit plate which uses IR technology to allow egress from a protected area or activate a device with the simple wave of a hand. Since no touch is required, this sensor is suitable for use in hospitals, clinics, labs, cleanrooms (to reduce the risk of contamination), schools, factories, or offices.
Features:
- ETL, Conforms to UL Std. 294
- Adjustable sensor range up to 7″ (18cm)
- 1.2A relay, adjustable trigger duration 0.5~30 seconds or toggle
- LED illuminated sensors are for easy identification
- Selectable LED colors turn from red to green (or green to red) when the sensor is activated
- Stainless steel plate
- IP65 Weather-resistant for outdoor use
- Power must be provided by low-voltage power-limited/class 2 power supply
- Use only low-voltage field wiring and do not exceed 98.5 ft (30m) activated
Specifications:
- Operating Temperature: 12~24 VDC
- Current Draw (max. ±10%):
- Standby red (12/24 VDC): 13mA / 15mA
- Triggered green (12/24 VDC): 21mA / 25mA
- Standby green (12/24 VDC): 12mA / 14mA
- Triggered red (12/24 VDC): 23mA / 28mA
- Relay Type: SPDT dry contact, 1.2A@24VDC
- Response Time: 10ms
- LED: Standby: red, triggered: green. Color function reversible, when properly installed
- Output Duration: 0.8~30 s, toggle
- Range: 2″~7″ (5~18 cm)
- Destructive Attack Level: Level I
- Line Security: Level I
- Endurance Level: Level IV
- Standby Power: Level I
- IP Rating: Weatherproof, IP65
- Operating Temperature: -4°~131° F (-20°~55° C)
- Dimensions: 1-1/2″ x 4-1/2″(39 x 115mm)
- Weight: 2.2-oz (61g)
Specifications for Seco-Larm SECSD-9163-KSQ
Other SpecsAlternate Codes | SD-9163-KSQ, SD9163KSQ |
Category | Access Control, Hardwired, Pushplates/Buttons & Switches |

