Camden Door Controls

CM-RQE70A Series PIR "request to exit" detectors provide the latest word in design, with a complete list of "high performance" features, including secondary activation device input, door monitoring, two relay outputs, and tamper alarm. Many new programming, installation, and set-up features that have never previously been available. Camden started by making the CM-RQE70A smaller, so it can easily fit on door frames, and then made installing the detector faster and easier. CM-RQE70A comes with 4 factory default operating modes that can be selected with simple push buttons on the circuit board. Have an unusual installation and need custom settings? No problem. You can use the on-board push buttons to customize the default operating modes or program your own custom operating mode. CM-RQE70A isn't just a new REX detector, it's a whole new approach to REX detector design!

Features:

• Compact size, designed to mount on door frames
• Easy to use on-board programming buttons. No dip switches
• (4) Factory default operating modes, with the ability to customize mode attributes
• Selectable fail safe/fail secure
• (2) Form ‘C’ contacts
• Momentary and latching relay modes
• Secondary activation device input
• Card/keypad Input
• Door position switch input
• Request to exit input
• Built-in sounder (adjustable)
• Tamper switch

Specifications:

• Voltage: 12/24 VDC Operation
• Current Draw: 50 mA (Max)
• Relays: (2) Form ‘C’ (DPDT)
• Contact Rating: 3 A @ 30 VDC
• Programming: On-board push buttons and status LED
• Modes: (4) Factory default (1) fully custom selectable fail safe/fail secure
• Coverage: Max. 10’W x 10’H Horizontal and Vertical Adjustment (Mechanical) Sensor Sensitivity/Range (Electronic)
• Time Delay: Adjustable, 5, 15, 30, 45 & 60 second
• Sounder: On/off, with adjustable volume
• Piezo Buzzer: 92 db. @ 10cm
• Indicator: Activation LED
• Card or Keypad Input: (1) N/O
• Door Position Switch Input: (1) N/O
• Request to Exit Input: (1) N/O
• Tamper Switch Contact Rating: 50 mA 12 VDC
• Temp Operating Range: 32°F-120°F (0-50°C)
• Humidity Range: 0- 93% Non-condensing
• Dimensions: 7.25" L x 2.5" W x 1.87" H
• Weight: .25 Lbs. (0.12kg.)lbs.

Includes:

• (2) CM-45/4: Wheelchair and "push to open"
• (2) CM-43CB: Surface boxes
• (2) CM-TX-9: Transmitters
• (1) CM-RX-90: Receiver