Offset Long Ladder Pull with Flat Tips, 1in Diameter, 12in Length, 8in CTC Post, 630/US32D Satin Stainless Steel
Part#: IVE9264F-12-8 US32D
Hot#: 173530
Mfg: Ives
Available: 2 ( 2 KAN )
Notice: The info below is not item specific.
Ives Long Door Pulls
Ives long door pulls are offered in offset and straight models, a variety of lengths and center-to-center mounting spacing. In addition, Ives offers a wide selection of finishes, round and flat tip options and mounting hardware to meet any application needs. Offered in 316 stainless steel, the long pulls exceed industry standards for corrosion resistance in exterior applications. Ives long pulls coordinate seamlessly with other contemporary styles and finishes of door hardware for a complete, secure and attractive door solution.
Features:
- 1-1/4" Diameter tubular bar
- Flat tip
- Available in whole 1" increments from 12" to 96"
- Meets ANSI A156.06
- Heavy duty mounting hardware exceeds industry standards
- 3/8-16 mounting hardware
- Standard mounting hardware for door thickness of 1-1/2" to 1-3/4"
- Comes standard with thru-bolt screws and decorative washers.
- Projection: 2-3/4"
- Clearance: 1-1/2"
- Offset: 3-5/8"
- Caution: Recommend the length of the ladder pull should not exceed 4" less than the door height Offset long door pull, rounded tip
- 1-1/4" Diameter tubular bar
- Round tip
- Available in whole 1" increments from 12" to 96"
Specifications:
- Available Sizes:
- 1 1⁄4" Diameter tubular bar
- Round tip is standard
- Optional flat tip (F) is available; specify F after model number when ordering
- Available in whole 1" increments from 12" to 96"
- Material Substrate:
- Made from brass or stainless steel (316 series)
- 316 Series stainless steel standard, exceeding industry standards for corrosion resistance
- Recommended for external applications
- Mounting Hardware:
- Heavy duty mounting hardware exceeds industry standards
- 3⁄8-16 mounting hardware
- Specify door thickness: Standard mounting hardware for door thickness of 1-1⁄2" to 1-3⁄4" unless otherwise specified. Optional package available for 2" and 2 1⁄4" thick doors
- Comes standard with through bolt screws and decorative washers
- Optional mounting hardware available A, I, L, N, O, P, Q, X
- Mounting hardware for other door thicknesses are available as engineering special
Standard Lengths:
| Product Number | Projection | Clearance | Offset | Overall Length | CTC |
|---|---|---|---|---|---|
| 9264-72-56 | 2-3/4" | 1-1/2" | 1-5/8" | 72" | 56" |
| 9264-36-20 | 2-3/4" | 1-1/2" | 1-5/8" | 36" | 20" |
| 9264-24-18 | 2-3/4" | 1-1/2" | 1-5/8" | 24" | 18" |
| 9264-18-12 | 2-3/4" | 1-1/2" | 1-5/8" | 18" | 12" |
| 9264-12-8 | 2-3/4" | 1-1/2" | 1-5/8" | 12" | 8" |
| 9266-72-56 | 2-3/4" | 1-1/2" | -- | 72" | 56" |
| 9266-36-20 | 2-3/4" | 1-1/2" | -- | 36" | 20" |
| 9266-24-18 | 2-3/4" | 1-1/2" | -- | 24" | 18" |
| 9266-18-12 | 2-3/4" | 1-1/2" | -- | 18" | 12" |
| 9266-12-8 | 2-3/4" | 1-1/2" | -- | 12" | 8" |
Through Bolt Mounts:
- STD Mount - Standard Mount:
- Through bolt mount with countersunk washers
- Hollow metal and wood door applications
- (2) 3⁄8-16 x 2-1⁄4" brass, flathead mounting screws, plated to match
- (2) 3⁄8-16 Countersunk washers, plated to match
- F Mount - Countersunk Holes:
- Used with countersunk holes in doors
- Wood door applications
- (2) 2-1⁄4" steel flathead mounting screws, plated to match
- O Mount - Decorative:
- Decorative through bolt mount
- Hollow metal and wood door applications
- (2) 3⁄8-16 x 2-1⁄4" Decorative mounting bolts - machine screw, plated to match
- Q Mount - Decorative, Glass Doors:
- Decorative through bolt mount
- Glass door applications
- (2) Decorative mounting bolts - machine screw, plated to match
- (2) Metal and vinyl washers
- X Mount - Security:
- Security through bolt mount with countersunk washers
- Hollow metal and wood door applications
- (2) Flathead security pin in socket mounting screws, plated to match
- (2) Countersunk washers, plated to match
Concealed Mounts:
- A Mount - Aluminum Doors:
- Concealed mount
- Aluminum door applications
- (2) Mounting bolts - machine screw
- (2) Set screws
- Designed to be used with rivet nuts (not supplied)
- G Mount - Pull Plate:
- Concealed mount with pull plate
- Hollow metal and wood door applications
- Pull mounts directly onto plate; plate is attached to door
- (2) 3⁄8 - 16 x 5⁄8" steel flathead mounting screws
- I Mount - Wood Doors:
- Concealed mount
- Wood door applications
- (2) Mounting bolts - wood screw
- (2) Set screws
- L Mount - Hollow Metal Doors:
- Concealed mount
- Hollow metal door applications
- (2) Mounting bolts - machine screw
- (2) Set screws
Back to Back Pull Mounts:
- J Mount - 8102 Pull Only:
- Back to back mounting - 5/16-18 hardware
- Hollow metal and wood door applications
- (2) Mounting bolts - machine screw
- (2) Set screws
- K Mount - 8121 Pull Only:
- Back to back mounting - 8-32 hardware
- Hollow metal and wood door applications
- (8) Machine screws
- (4) Mounting sleeves
- N Mount:
- Back to back mounting - 3/8-16 hardware
- Hollow metal and wood door applications
- (2) Mounting bolts - machine screw
- (2) Set screws
- P Mount - Glass doors:
- Back to back mounting - 3/8-16 hardware
- Glass door applications
- (2) Mounting bolts - machine screw
- (2) Set screws
- (2) Metal and vinyl washers
Finishes:
- 605/US3 - Bright brass
- 606/US4 - Satin brass
- 613/US10B - Oil rubbed bronze
- 619/US15 - Satin nickel
- 629-316/32-316 - Bright stainless
- 630-316/32D-316 - Satin stainless
- 630-AM/US32D-AM- Satin stainless antimicrobial
- 631/BLK - Matte black
- 695/SP313/US10BE - Dark bronze powder coat
Specifications for Ives IVE9264F-12-8 US32D
Other Specs| Alternate Codes | 9264F-12-8 US32D, 9264F-12-8-US32D, 9264F128US32D, IVE9264F-12-8-630, IVE9264F-12-8-US32D |
| Category | Door Accessories, Push & Pull Plates |
x
Offset Long Ladder Pull with Flat Tips, 1in Diameter, 12in Length, 8in CTC Post, 630/US32D Satin Stainless Steel: #IVE9264F-12-8 US32D