IML Security Supply
**** Prices updated to include tariff increases from the manufacturers. This is an ongoing process. Thank you for understanding. ****
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Explosion Proof Single Door Electromagnetic Lock, Pull Side Top Jamb Z Bracket Included, Top Conduit, 600lbs, Door Position Status, 24VDC, 628/US28 Satin Aluminum

Part#: SDCEP17624TJ
Hot#: 206368

Available: 2 ( 2 SAC )

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Security Door Controls


The EP17624 series explosion proof electromagnetic locks are specifically designed for applications where flammable vapors are cause for concern: clean rooms, chemical plants, or refinery environments by eliminating the sparks or arc in the magnetic lock. UL listed for use in hazardous locations class 1, division 2. This unit is intended to be used in the following atmospheres: acetone, ammonium hydroxide, ATSM fuel C, benzene, methylethylketone, diethyl-ether, 2-nitropropane, ethyl-acetate, furfural, normal hexane, methyl alcohol. Operating temperature for the magnetic lock will not exceed 185° F (85° C). Maximum ambient temperature is not to exceed 104° F (40° C). For supply connections, use a suitable wire with a minimum insulation temperature rating of 167° F (75° C). This unit must be connected to a NEC (National electric code), NFPA 70) class 2 supply circuit rated for 24 VDC with a minimum current output of 500 mA and output power of 12 watts. UL listed SDC 600 series power controller is recommended. EP17624TJ models include a Z bracket for top jamb, pull-side applications.

Features:

  • Hazardous location design
  • Explosion proof epoxy sealed
  • Corrosion resistant
  • Conduit chamber with terminal block
  • Interlocking quick mount assembly
  • Voltage and current spike protection
  • Door position status (DPS)

Models:

  • EP17624: Single explosion proof magnetic lock, side conduit, 600lbs
  • EP17624TJ: Single explosion proof magnetic lock, top conduit, 600lbs

EP17624TJ Specifications:

  • Housing: Aluminum
  • Finish: 628 Dull aluminum
  • Conduit Location: Top
  • Mounting: Push-Side, top jamb Z bracket included
  • Holding Force: 600 lbs
  • Dimensions: 10-1/2” x 2-1/4” x 1-3/4” Housing, 7-1/8” x 1-3/4” x 3/4” armature
  • Weight: 10 lbs
  • Input: 24 VDC ± 10%
  • Current Draw: 250 mA
  • Door Position Status (DPS): SPDT, 100 mA @ 30 VDC Resistive

Specifications for Security Door Controls SDCEP17624TJ

Other Specs
Alternate CodesEP17624TJ
CategoryAccess Control, Brackets, Plates & Spacers, Maglock Parts and Accessories, Maglocks