Adams Rite Manufacturing

Security for pairs of doors with single key turn is possible with the 4016 header bolt. The two-point locking solution secures the entire double door entrance when working in conjunction with an MS deadlock. Adding the 4016 header bolt to a pivoted bolt MS deadlock provides maximum security for pairs of doors with the turn of a single key. Simultaneously extending the stainless steel hex bolts into the header and pivoting the massive MS bolt into the mating door’s stile, the two point locking solution secures the entire entrance. The 4016 header bolt can be added to any basic MS1850S, MS1850SN, MS1950 series deadlock or for two-points top and bottom use with 1870/1870HM cylinder-operated flushbolt. Not applicable to 7/8" backset locks. Both the 4016 header bolt and the 4015 threshold bolt may be added to a pivoted bolt MS deadlock to provide maximum security for pairs of doors by the turn of a single key. Simultaneously extending the stainless steel hex bolts into the header and threshold and pivoting the massive MS bolt into the mating door’s stile, thereby providing a three-point locking solution. 360° turn of key or thumbturn in basic MS deadlock throws counterbalanced bolt into opposite door and hexagonal bolt into header. Key can be removed only when bolts are in a positively locked or unlocked position.

Specifications:

• Door Height: Select 7' [2133.6 mm] or 10' [3048 mm] door height. The standard version is designed for 7’ [2133.6 mm] door height, with cylinder height as low as 35" [889 mm].
• Header Bolt: Hexagonal 3/8" [9.5 mm] flat to flat. Made of stainless steel.
• Adjustment: Exact adjustment of threaded rod to door height is locked in place by hexagonal header bolt.
• Strike: For header bolt, a 1/2" [12.7 mm] diameter hole in metal frame is suitable. For non-metal installation, 4005 strike is available separately.