Corbin Russwin

The DC6000 series is an ideal closer for high-use openings or openings that must meet ADA requirements. Featuring internal advantages such as, double O-rings, a robust spring tube design and captured values, the DC6000 series delivers a reliable and consistent operation.

Features:

• ANSI/BHMA A156.4, grade 1
• DC6200: Multi-size spring power; adjustable 1-6. DC6400: sizes 1-6, half-size adjustability
• Non-handed
• Cast iron case with seamless cold headed steel spring tube
• Standard forged steel arm
• 1-3/8" diameter piston
• Quick-Install mounting bracket standard
• Allows door to swing 180° for regular, top jamb and parallel arm mounting (conditions permitting)
• Standard mounting regular or top jamb. Parallel arm or try-style packaging specify DC6210 or DC6410
• Self-drilling screws standard
• Latching speed, closing speed and backcheck valves standard
• Quick-Install mounting bracket speeds installation, reducing cost and errors
• Painted or plated finishes
• Captured valves assist in making closer tamper resistant
• Metal cover optional
• Heavy-duty arms offer increased strength for high-use, high-abuse situations
• 30-year limited warranty

Specifications:

• Spring Power:
• DC6200 closers: multi-sized; fully adjustable sizes 1 through 6.
• DC6400 closers: sizes 1 through 6; half-size adjustability.
• Handing: Non-handed (with the exception of some arms and accessories).
• Body: Cast iron case with seamless cold-headed steel spring tube.
• Arm: Standard: forged steel.
• Spindle: Heat-treated steel with a crowned gear set for increased efficiency.
• Piston: 1-3/8" diameter; precision machined, heat-treated steel.
• Springs: Chrome silicon wire.
• Valves: Latching speed valve standard. Closing speed valve standard. Multiple backcheck location valve and backcheck intensity valve standard. Delayed action valve optional. Delayed action preset for 20 seconds. Between 90° and 70° for all mountings. To order specify M71.
• Seals: “O” rings.
• Fluid: Standard high lubricity extreme temperature hydraulic fluid.
• Degree of Opening: Up to full 180° opening standard for regular, top jamb and parallel arm mountings, conditions permitting.
• Power Adjustment Arm Bracket: 15% adjustment standard.
• Cover: Standard: plastic V-O flame rated cover. Optional: full metal cover; specify M73 x hand.
• Mountings: Standard: regular or top jamb. Parallel arm or tri-style packaging: specify DC6210 or DC6410. Optional mountings available.
• Mounting Bracket: Quik-Install mounting bracket standard.
• Fasteners: Standard: self-drilling screws. Optional: sex nuts and bolts (SNBs); Specify M54.
• Corrosion Protection: Painted protective coating on all metal surfaces for use in corrosive environments.
• Security Package: Includes heavy-duty parallel or regular arm, full metal cover and security Torx machine screws. Specify M87 x arm x hand.
• Warranty: 30-year limited warranty.

Models:

• DC6200, DC6400: Regular Arm
• Most common mounting, providing the greatest closing efficiency.
• Closer is mounted on the pull side, with the arm almost perpendicular to the face of the door.
• Arm bracket is attached to the door frame.
• DC6210, DC6410: Parallel Arm
• Allows inside application of closer on out-swinging doors
• Closer is mounted on the push side, with the arm parallel to the face of the door
• Arm does not project from the opening
• DC6220, DC6420: Top Jamb
• Closer is mounted on the frame on the push side, with the arm perpendicular to the face of the door.
• Arm bracket is mounted on the door.
• Minimum 1-3/4" (44mm) top jamb required.
• Accommodates reveals up to 3-1/4" (83mm).
• DC6230, DC6430: Pull Side Track
• Closer is top jamb mounted on the pull side; arm is connected to a door-mounted track.
• Maximum degree of opening is 110°.
• Maximum closing power is size 4.
• Minimum 3" (76mm) frame face required.
• DC6240, DC6440: Push Side Track
• Closer is mounted on push side of door; arm is connected to a stop-mounted track.
• Maximum degree of opening is 110°.
• Maximum closing power - size 4.

Door Closer Arms:

• 688F95 (Non-Hold Open)/688F77 (Hold-Open): Regular Arm
• Used with regular arm mounting (pull side) and top jamb mounting (push side)
• Non-hold open arm standard on the DC6200 and DC6400 closers
• Hold Open arm optional, specify closer x A1
• 691F72 (Non-Hold Open): Deep Reveal Arm (3-3/8" (86mm) - 7-1/4" (184mm))
• Accommodates top jamb mounting for reveals up to 7-1/4" (184mm), depending on door and frame conditions
• Mounted on push side
• Available in painted or plated finishes
• Optional on DC6220 and DC6420 closers
• Non-hold open, specify closer x A6
• Hold open, specify closer x A8
• 597F52 (Non-Hold Open Only): Heavy-Duty Regular Arm
• Recommended for high-use, high-abuse environments
• Tamper-resistant, solid forged steel riveted arm
• Mounted on pull side
• Not available in plated finishes
• Optional on DC6200 and DC6400 closers, specify closer x A10
• 688F95 x 188F41 (Non-Hold Open)/688F77 x 509F49 (Hold Open): Parallel Arm
• Mounted on push side
• Non-hold open arm – combines regular arm with parallel arm mounting bracket
• Available in painted or plated finishes
• Hold open arm – combines regular hold-open arm with parallel arm mounting bracket
• Non-hold open arm standard – order DC6210 or DC6410 series
• Hold open arm optional, specify closer x A1
• 689F02 (Non-Hold Open)/689F01 (Hold-Open): Heavy-Duty Parallel Arm
• Recommended for high-use, high-abuse environments
• Tamper-resistant, solid forged steel riveted arm
• Mounted on push side
• Not available in plated finishes
• Optional on DC6210 and DC6410 closers
• Non-hold open arm, specify closer x A3
• Hold open arm, specify closer x A2. Hold-open range 85° to 110°
• For use with overhead stops, specify closer x A13
• 689F03 (Non-Hold Open)/689F04 (Hold-Open): Heavy-Duty Reversible Backstop Parallel Arm
• Recommended for high-use, high-abuse environments
• Tamper-resistant, solid forged steel riveted arm
• Mounted on push side
• Not available in plated finishes
• Optional on DC6210 and DC6410 closers
• Field-reversible steel lug restricts degree of opening to protect door, wall and hardware
• Shipped standard as left hand. Handing can be reversed in the field
• Non-hold open arm, specify closer x A4. Doorstop range 85° to 110°
• Hold open arm, specify closer x A5. Door stop/hold open range 85° to 110°

Finishes:

• USP/600 - Primed for painting
• US3/605 - Bright brass, clear coated
• US4/606 - Satin Brass, clear coated
• US9/611 - Bright bronze, clear coated
• US10/612 - Satin bronze, clear coated
• US10BE/613E - Dark oxidized satin bronze-equivalent coated
• US26/625 - Bright plated chrome
• US26D/626 - Satin plated chrome
• SBL/689 - Silver aluminum coated/sprayed
• DBL/690 - Dark bronze coated/sprayed
• LBL/691 - Light bronze coated/sprayed
• FBL/693 - Black coated/sprayed
• GBL/696 - Satin brass coated/sprayed
• BSP - Black suede powder coated/sprayed
• WSP - White suede powder coated/sprayed