Door Controls International 1200 / 1300 Series Rim Exit Only Alarm

1200 SERIES RIM EXIT DEVICE
The 1200 Series is designed to provide maximum exterior security, while offering safe egress. Pannex devices can offer versatility to any building's security system.Alarm modules with or without dogging can be added, and signal switches can be installed for all access control applications.

1300 SERIES ELECTRIC RIM EXIT DEVICE
The 1300 Series is the same versatile device as the 1200 Series device, with the addition of a solenoid. The 24 V solenoid will lock and unlock the device by remote operation. The unique design of the latch and strike requires less than 400 milliamps to unlock the device.

SPECIFICATIONS

• High Security
• Fire rated
• Weather Resistant
• All devices re-latch
• Non handed
• Preassembled for easy installation
• Dogging available
• 3 standard alarm modules for all devices
• Standard lengths for 36" or 48" doors
• Can be field cut for undersized doors
• Designed for narrow stile aluminum doors
• Finishes available in aluminum or dark duranodic
• Outside trim available

LISTINGS

FEATURES

• Functions

The alarm can be unarmed and the door can be used for high frequency egress. All alarm modules can be used on 3 hours or less fire-rated doors. Dogging is available on non-fire-rated doors. All devices are weather resistant for outdoor use.
• Alarm Sound

A 110 decibel piezo horn. The horn sound is activated only by depressing the push bar when in the "Armed" position.
• Alarm Indicator

A highly visible 4"" diameter red or green indicator informs owner of armed or unarmed mode. The blue indicator is the service mode to access the battery or the control cylinder.
• Battery Maintenance

A 9-volt alkaline battery is supplied and recommended for replacement. An audible chirp each minute indicates that the battery needs replacement. The battery is easily replaced by turning the control key counterclockwise to the "service" position (indicator—Blue). In this position the extruded cover, with both the alarm and end cap attached, may be slid out as a unit, exposing the battery for service.
• Key Control Cylinder

A 15/16" mortise cylinder with Schlage C keyway and Yale cam are supplied. The control cylinder activates the alarm indicator.

Alarm Modules
Three standard alarm modules are easily added to both the 1200 & 1300 Series Rim Exit Device to provide an alarm emergency exit. The alarm modules are compact in design, while offering many versatile features

• 10 Alarm Module; No. 1210, L1210, 1310, L1310
• Operated by a 9V Battery
• Audible chirp as the low battery indicator
• Field select continuous horn with manual reset, or 3-5 minute sound with automatic reset
• Field select intermittent beep or steady horn
• 20 Alarm Module; No.1220, L1220, 1320, L1320
• Operated by 10 - 26V DC Remote Power, with a 9V Battery backup
• Audible chirp as the low battery indicator
• Field select continuous horn with manual reset, or 3-5 minute sound with automatic reset
• Field select intermittent beep or steady horn
• 30 Alarm Module; No. 1230, L1230, 1330, L1330
• Operated by 10-26V DC remote Power
• Field select continuous horn with manual reset, or 3-5 minute sound with automatic reset
• Field select intermittent beep or steady horn

PANNEX

PANNEX - has a revolutionary patented interlock latch and strike. The latch rotates to engage and grip the specially designed strike. This simple, heavy-duty assembly is constructed of investment cast stainless steel heat treated and tempered to 200,000 P.S.I. providing trouble free, high-frequency use.

This unique interlocking grip action of the device secures the door to the jamb without conventional roller strikes or retracting latches. In addition to the latch and strike, an interlocking mechanism located in the chassis offers a double interlocking system which makes the PANNEX device virtually impossible to tamper with, pry or force open.