Finish: Satin Chrome
Contact an IML Representative for Details
DormaKaba Architectural Hardware LM Series Pivots
LM Series pivots are produced from brass or steel for interior and exterior non-rated and fire-rated doors. Top pivots and bottom arms will be center hung, 3/4" or 1-1/2" offset. Pivots can be substituted within a pivot set, assuming the offset is the same. Offset 3/4" and 1-1/2" top pivots are available for doors that are inset 1/8" from the frame face while standard intermediate and bottom arms are templated accordingly. Center hung pivots will accommodate double-acting and single-acting doors. Center hung single-acting doors will use an applied stop. Pocket pivots will accommodate doors opening 90° that must be flush with an adjacent wall. All pivots and pivot sets will incorporate needle bearings and lubricated hardened steel pivot pins treated to prevent corrosion.
- Intermediate pivots will be 3/4" or 1-1/2" offset.
- Side jamb bottom pivot will be 3/4" offset.
- Top and intermediate pivots will be full mortise configurations.
- Bottom arms and side jamb pivot will be mortised.
ANSI Conversion Chart:
| ANSI # | ANSI Requirement/Function | Dorma Pivot Set | Dorma Pivots |
|---|---|---|---|
| CO7011 | Center pivoted, 1000 lb door max | CP1000 | – |
| CO7O21 | Center pivoted, 250 lb door max | CP660 | – |
| CO7032 | Center pivoted, 150 lb door max | CP440, CPA440 | – |
| C07121 | Offset pivoted, 250 lb door max | OPH750, OP1550 | – |
| CO7131 | Offset pivoted, side jamb bottom pivot, 250 lb door max | OPJ350 | – |
| CO7162 | Offset pivoted, 150 lb door max | OP440, OPL440, OP15200 | – |
| CO7172 | Offset pivoted, side jamb bottom pivot, 150 lb door max | OPJ350 | – |
| CO7202 | Offset pivoted, labeled fire doors, 150 lb door max | OPF440, OPLF440, OPF15200 | – |
| CO7311 | Offset pivoted, lead-lined intermediate pivot | – | 75240 |
| CO7321 | Offset pivoted, intermediate pivot | – | 75220, 15220 |
| CO7371 | Offset pivoted, intermediate pivot, labeled fire doors | – | 75233, 15233 |
| CO7382 | Offset pivoted, full mortise intermediate pivot (light-duty) | – | 75210 |
Finishes
- Painted Finishes:
- Primed for Painting: 600
- Brass: 605 (Bright) or 606 (Satin)
- Bronze: 611 (Bright), 612 (Satin), or 613 (Oxidized Satin Oil Rubbed)
- Nickel: 618 (Bright) or 619 (Satin)
- Chrome: 625 (Bright) or 626 (Satin)
- Sprayed Finishes:
- Aluminum: 689
- Bronze: 691 (Dull), 690 (Statuary), or 695 (Dark Duranodic)
- Gold: 696
- Black: 693
Specifications for DormaKaba Architectural Hardware DDC75220626LH
Other Specs| Alternate Codes | 142890, 75220626LH |
| Category | Hinges, Pivots |
| Door Size | 4'.0" Wide |
| Finish Color | Satin Chrome |
| Handing | Left Hand |
| Hinge Rating | 440 lbs |
| Hinge Size | 5" x 1-1/8" |
| Hinge Style | Intermediate Pivot |
| Hinge Type | Pivot Hinge |
| Inset | 5/16" |
| Offset | 3/4" |
