Sargent 6300 Series

Features:

• LFIC (removable) core cylinders and master key systems are available for a quick change of cylinders for increased security. It is not necessary to remove the lock from a door to rekey the opening
• Special “control” key is used to release a locking cam allowing immediate removal of the core
• Available for use in many Sargent products (exit devices, mortise locks, bored locks and padlocks)
• LFIC Key systems can also include conventional cylinders operated by the same master/change keys when the 6300 quick change feature is not needed
• Can be master or grandmaster keyed
• 2 Change keys provided
• 6 pin standard
• 1 bitted available for field keying
• 1 bitted cylinders supplied with 2 key blanks, pins and springs in chambers in 3 and 4 only
• HA keyway will be supplied unless otherwise specified
• Wide variety of master key systems available
• Permanent (keyed Large format interchangeable) cores supplied with hardware unless specified otherwise
• Available in the following Sargent keyway families: A, B, C, G, H, K, L, N, R, and V
• Also available in the following single key sections: CR and S
• Control key is 6272 CTL, ordered separately
• Finishes: 4, 15
• Ordering as a: 6300 LFIC Core x finish and give all keying information

6300 Series Parts Only:

• 13-0795: Plug, finishes: 4, 15
• 13-3424: Inner shell & slide assy, finishes: 4, 15
• 13-0796: Control sleeve
• 01-0660: Plug retaining ring
• 13-0797: Slide for cylinders with a box around the word Sargent (mfg prior to 4/06)
• 13-1341: Slide for cylinders without a box around the word Sargent (mfg after 3/06)