DormaKaba Architectural Hardware

The 8000 series exit devices with deadlocking latch bolts minimize forced entry while offering a low-cost solution to security and life safety requirements. The touchbar, rail assembly and integral parts are constructed of solid steel. Devices are available for labeled and non-labeled openings. For paired doors where a full-width opening is only occasionally required, removable mullions are used. Doors are fitted with rim exit devices and normally function as single doors. Steel and aluminum mullions are available in 8' or 10' lengths.

Features:

• Antimicrobial protected coating
• Available in rim and surface vertical rod
• Complies with NFPA 101 life safety code
• Hurricane code approved
• CBC-compliant option (BF) for maximum 5 lb operating force (9300, 9500, 9700)

Functions:

• 01: Exit only (no trim)
• DT: Dummy trim
• 02: Entrance by trim when actuating bar is locked down
• 03: Entrance by trim when latchbolt is retracted by key. Key is removeable only when locked.
• 05: Entrance by thumb piece. Key locks or unlocks thumb piece.
• 06: Entrance by thumb piece only when released by key. Key removeable only when locked
• 08: Entrance by lever or knob. Key locks or unlocks lever or knob.
• 09: Entrance by lever or knob when unlocked by key. Key removable only when locked.
• 22: Entrance by thumbpiece (no cylinder). Trim always active.
• 23: Entrance by lever or knob (no cylinder). Lever or knob always active.

Specifications:

• All exit devices shall be 8000 series rim, surface vertical rod or surface vertical rod “less bottom rod” devices.
• All device touch bars, rails, and integral parts shall be constructed of solid steel with ABS thermoplastic end caps and covers.
• Non-labeled units to have hex-key dogging standard.
• Fire rated versions shall be available for labeled applications.
• All surface vertical rod devices shall have pullman type latch bolts for the top latch with a round slide bolt bottom latch.
• All units shall offer trim options ranging from no trim, exit only blank trim, entrance by trim when touchbar is dogged, entrance when latch bolt is retracted by key, and entrance by lever set with a key to lock and unlock lever.
• Device touchbar, rail, and rods shall be available with a powder coated finish or base material stainless steel.
• Certification: Certified/listed to ANSI/BHMA 156.3, grade 1 for exit devices.

Finishes:

• 689 - Aluminum
• 691 - Dull bronze
• 695 - Dark duranodic bronze
• 693 - Black
• 696 - Gold