Command Access PD15-M Series Exit Devices

The PD15-M series is a motorized latch pullback Grade 1 storefront exit device made for use in all institutions and commercial buildings storefront applications. All PD15-M models are equipped with our PTS “push to set” technology. As a retrofit for the Jackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existing mounting locations and mortise or rod & case assemblies without having to remove the door. Install this device with the confidence of knowing that the PD15-M series meets or exceeds the high standards of other grade 1 products and carries our 3-year “no hassle” warranty, meaning we will support you.

Features:

• Retrofits the Jackson 1285/95 & Kawneer 1686/1786 series exit devices.
• Motorized Latch Retraction w/ Easy adjustment.
• Long wire runs w/ 18ga No need for specialty power supply right above the door.
• 3 Year No Hassle Warranty.
• MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues.
• Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position.
• The slim, compact attractive low profile design enables mounting on narrow-style doors.
• Maintains factory dogging.

Specifications:

• Electronics:
• System protection: unit shutdown when voltage exceeds 28VDC.
• Standard: Average Current Peak: 1.3A, Average Current Hold: 170mA.
• High Torque: Average Current Peak: 2A, Average Current Hold: 250mA.
• PTS adjustment: approx. 1/4".
• 300’ Run w/ 18ga.
• Handing: Device is non-handed.
• Push bar Length: Standard sizes: dimensioned for 36" and 48" openings. Standard width bars can be field cut to the next smallest opening width. (48" & 36" - Cutdown all the way to the pushpad)
• Door Thickness: Suits 1-3/4" standard.
• Projection: 2-5/8" when fully projected, 1-5/8" when dogged.
• Stile Width: Minimum 2" Stile. Fits narrow, medium, and wide stile aluminum doors.
• Dogging: Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
• Fasteners: Standard self-tapping screws.
• Vertical Rods:
• Top and bottom steel rods for easy adjustment.
• Standard device is adjustable for nominal door heights.

Accessories:

• Request to Exit (REX): Switch available factory installed.
• Request to Exit Kit (PD15REXKIT-M-ED): Switch available for installation in the field.

Finishes:

• 628 - Aluminum
• 313 - Duronatic