IML Security Supply
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Electric Strike 12VAC Intermittent Fail Secure (FSE), (Field Reversible to FS), Radius Corner (RC), 1-1/4in x 4-7/8in Faceplate, Aluminum Clear Anodized (628)

Part#: ADR7100-340-628
Hot#: 128656

Flat face plate for aluminum jambs. For Adams Rite or Cylindrical latches. Fail Secure (FSE)

  • Overview
  • Specifications

Adams Rite 7100, 7101 Electric Strikes

7100, 7101 Electric Strikes with 4-7/8” faceplates are designed for Adams Rite deadlatches or cylindrical locksets with 1/2” to 5/8” latchbolt projection. For use in aluminum jambs and stiles.

Remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with 1/2” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. Fits existing prep for discontinued Adams Rite 7000, 7500, 7800 Electric Strikes.


» Fail-Safe/Fail-Secure: Field convertible from one mode to the other. However, AC intermittent solenoid must not be used continuously in either.
» Case: Approximately 1" x 3-3/8" x 1-5/8" deep.
» Strike Lip: Basic 7100 strike has lip of proper length for 1-3/4" thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number. Not available on 7101.
» Strike Opening: 5/8" x 1-7/16" x 1/2" deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
» Faceplate: Measures 1-1/4" x 4-7/8". 7100 has flat faceplate; 7101 is radiused to match nose on inactive leaf in a pair of narrow stile glass doors. Available in a wide range of architectural finishes.
» Voltage: Available in 12 or 24 volt AC and DC. DC continuous units are silent, AC intermittent units "buzz" on operation.

Volts AC Intermittent DC Continuous


Available with two monitoring signal switches which sense whether latch bolt is in strike and whether strike jaw is blocked. Choice of mounting in AC and DC for intermittent or continuous duty. 7100 Electric Strike (flat faceplate) available with extended strike lip. Specify assembled for either fail-secure (locked when unpowered) or fail-safe (locked when powered) operation, but can be field converted to the other mode.

» 4603 Rectifier – converts AC to DC, installs in low voltage line between transformer and strike. Rated 2 amps (200 PIV)
» 4605 Transformer – converts 120VAC to 12/24 VAC. Rated 40 Volt-amp output assures plenty of power for strike release. Patented mounting bracket fits in knockout hole of standard junction boxes.
» 4606 Transformer – Plug-in version for standard wall outlet.


  • 313 - Dark Bronze Anodized (Similar to 613 - 10B - US10B)
  • 335 - Black Anodized
  • 626 - Satin Chrome (US26D - 26D)
  • 628 - Clear Anodized (US28)

Specifications for Adams Rite Manufacturing ADR7100-340-628

Faceplate Size4-7/8" x 1-1/4"
Faceplate StyleFlat, Radius Corner
Fail StatusFail Secure, Field Selectable
Finish Code628
Frame TypeAluminum
GradeGrade 1
Strike Opening5/8" x 1-7/16" x 1/2" deep
Throw1/2", 5/8"
Voltage12V AC
Other Specs
Alternate Codes128656, 7100-340-628, 7100-340X628, 7100340628, 7100340X628, ADR7100-340X628, AL65
Case Size1 W x 3-3/8 H x 1-5/8 D
Compatibility, Lock CategoryCylindrical, Deadlatch