Lifesafety Power Inc

All-in-one power solutions for 4-10 door Salto systems using CU42E0, CU4200, or CU4EB8 controllers. Single, dual voltage/Networked. Salto unified power systems offers maximum flexibility, functionality and savings to access system designers. Salto Unified enclosures are engineered to house Flexpower boards in one compact, secure system. This unit is a 75W 12V and 24V DC dual voltage access power system. The C4 lock control module provides four access control inputs capable of voltage or dry contact activation, and four fused outputs programmable for failsafe / fail secure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO. Salto access enclosures are painted steel with two removable controller backplates and include lock, two (2) keys and tamper switch.

Features:

• FPO offline power supply:
• 120 or 230 VAC input
• 12 and 24 VDC outputs
• On board fire alarm interface
• Continuous and resettable DC
• Distributed output module: Four lock control - fused at 3A each
• Expansion options:
• Increased power, multiple voltages
• Additional distribution outputs
• Network monitoring and reporting
• Labor saving design:
• Pre-wired power section
• Pre-punched knockouts
• Preinstalled brackets hold two Salto controllers
• Flexible backplate mounting locations
• Access panels mount on threaded studs - no drilling required
• Additional benefits:
• Wire management room
• 4.5" enclosure depth fits battery set
• Tamper switch, lock, dual key set standard
• Mounting hardware for access boards included

Specifications:

• Input Power:
• Input 120/230 VAC 50/60 Hz | 83 Watts (0.69A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect
• Output Power:
• 2A@12V and 2A@24V DC, 75W maximum combined output power
• Outputs: Continuous (DC1) Resettable (DC2)
• 4 controlled outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 83% | System BTU Rating: 33 BTU/Hr
• Battery Charging:
• Independent built-in 1A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero delay when switching over to battery backup
• Supervision: AC Fail (form "C" contacts) System fail (form "C" contacts) may be triggered by low/no battery, short to earth ground and power supply failure
• Visual Indicators:
• AC input, DC1 and DC2 output
• System fault | AC fault | Short to earth ground | Reverse battery polarity
• Fire Alarm Input activated
• B100: DC input, output and Fault
• C4: DC input, output and Fault
• Enclosure Dimensions: Size: 14.00H x 12.00W x 4.50D in. (35.00 x 31.00 x 11.50 cm) | Weight: 14 lbs