Prodatakey

Red 1 controller includes built-in Ethernet connectivity and self-discovery, simplifying ip configuration and functionality. Communication plug-and-play connection options are added by purchasing a Red WiMAC wireless or PoE++ module kit. The Red 1 is equipped with OSDP functionality, an on-board power supply, and a fully-supervised power circuit that monitors input, output, battery voltage, and overall controller health.

Features:

• Advanced Security: Red products lead the industry in secure communication protocols. This includes OSDP, mobile, and encrypted credential communication.
• Power Monitoring: Equipped with an on-board power supply, and a fully-supervised power circuit that monitors input, output, battery voltage, and overall controller health.
• Plug-n-play Connectivity: All PDK Red devices were designed to be plug n' play. That means they're easy to install right out of the box. It's simple to add any device, no matter how large the job is.
• self Discoverable: The Red 1 will be automatically discovered by the Cloud Node when an Ethernet cable is connected; it is not necessary to enter the IP address; the device is self-discoverable.
• Module Kits: Additional WiMAC and PoE++ plug-and-play connection kits can be added by purchasing the respective wireless or PoE kit. Plug the module into the PDK Red 1 board, and it's ready to go.
• Systems Capability: Whether you need one door or a thousand, the PDK red 1 controller gives you the flexibility to add more doors anytime, anywhere, on any device.

Specifications:

• Connections:
• Removable screw-down terminals
• Built-in power supply
• Industrial-grade 2A form-C relay
• Reader
• Input A
• Input B
• Communication Options:
• Ethernet.
• WiMAC Wireless (2.4 GHz / 802.15.4).
• PoE++.
• Encryption: AES 128bit.
• Wireless Range: 1 mile LoS, 450ft indoor average.
• Environmental:
• Temperature: -4° ~ +140° F /-20° ~ +60° C
• Humidity: 0 - 95% relative humidity non condensing.
• Enclosure:
• Dimensions (W x H x D): 7.625" x 10.4375" x 3"
• Metal lockable security can (indoor use only).
• Compliance: Conforms to UL 294.
• Power:
• 12V-24V DC Input.
• 14 VDC 2A 28 watt class 2 wall-wart power supply (input supply to the board) powers readers and other door hardware directly from the bus
• Operating Amperage: 35mA (continuous amperage draw when idle)
• Power delivery to the peripheral is shared among all ports. Total output to peripherals is 2AMPs at 12V when powered with the included 2.5 AMP wall adapter.
• Battery not included, but a backup battery must be installed to comply with UL 294.
• Note: For proper operation, use the provided power supply. When not using the provided power supply, PDK recommends using a regulated power supply that outputs no greater than 24 volts as measured with a multimeter.