
8 Output Auxiliary Distribution Module, Class 2 Power Limited, Required by Code for Oregon & Washington
Part#: LSID8P-BOXED
Hot#: 200123
Mfg: Lifesafety Power Inc
Available: 4 ( 2 KAN, 2 SEA )
Notice: The info below is not item specific.
Lifesafety Power Inc
The D8 power distribution module adds 8 auxiliary power outputs to a Flexpower power supply and is typically supplied as part of a system, or purchased as an expansion piece to an existing system. The D8 provides 8 auxiliary power outputs, each one individually protected by a fuse (D8) or solid state circuit breaker (D8P). Each output is programmable to either of the two voltages available when used in a Flexpower dual voltage power system, or to the continuous output or the resettable output of the power supply when used in a single voltage system. D8 incorporates OutSmart technology - color changing output LEDs that visually indicate voltage level (green for 12V, blue for 24V).
Features:
- D8 DC Auxiliary power distribution
- F8 FAI Power distribution
- Fused or power limited versions
- Per zone voltage selection
- OutSmart visual voltage verification
- F8 also allows selection of constant, enable on FAI, or disable on FAI
- Simple field selectable switch sets output voltage.
- FlexConnect system minimizes installation labor by using board buss structure to eliminate accessory board interwiring
- Expand number of voltage outputs in increments of eight
- Add FAI functionality on a per zone basis
- Add simultaneous fail safe/fail secure voltage outputs
- Pre-punched cabinet layout allows expansion board additions with minimal labor
Functions:
- Flexibility:
- FlexConnect dual buss architecture for field selectable Buss 1 or Buss 2 output
- Fire alarm interface (FAI) for egress lock control when used with an FPO power supply in single voltage applications (via DC2 output)
- Multiple outputs for auxiliary power distribution or direct lock control and additional accessory power distribution modules
- Output Protection:
- D8 ATM style fuse: 3A/per output
- D8P Solid state circuit breaker: 2.5A/per output
- Visual Indicators: DC Out (dual color LED per output - green/12V or blue/24V)
- Mechanical:
- Multiple modules can be daisy chained to add additional outputs
- Snap-in style mounting standoffs with fast-on connect cables for easy field installation
- Lifetime Warranty: Fiberglass PCB and high efficiency circuit provides less heat generation leading to a longer service life and lower MTBF
Specifications:
- Power Outputs: 8
- Input Voltage: 12 and/or 24 VDC
- Output Voltage (Jumper Select): 12/24 VDC
- Output Current/D8: Fused at 3A per output
- Output Current/D8P: Class II at 2.5A per output
- Supports follow on modules: Yes
- Fire Alarm Interface: Per output (single voltage only)
Specifications for Lifesafety Power Inc LSID8P-BOXED
Other SpecsAlternate Codes | D8P-BOXED, D8PBOXED |
Category | Access Control, Alarm Power Supplies, Alarms & Intercom, Burglar Alarms, CCTV Products, Power Supplies, Wire & Power Supplies |