DormaKaba Architectural Hardware

The ED50LE Low Energy Swing Door Operator employs an innovative, and super-quiet, electromechanical drive that is a perfect solution for facilities who want a quick, quiet, and painless transition from manual doors to touch-free access such as commercial buildings, hospitals, schools, hotels and multifamily buildings. This swing door operator can automate new or existing swing doors with a push plate, wave plate, or other actuator devices. The ED50LE's advanced automatic power assist combines minimal push forces (as low as ANSI size 1) with reliable closing. All common applications for outswing and inswing doors — either with push arm or slide track arm for tight side clearance. The ED50LE is easy to install and makes existing doors easily accessible.

Features:

• Seamless control with integrated hardware power supply and relay.
• Built-in door position status, indicating door open or door closed.
• Close and latch in case of power loss (adjustable closing speed on loss of power).
• Hardware pre-load functionality for reliable operation.
• Connection to any access control system with built-in interface.
• Independently tested to 1 million cycles
• ED50LE offers full power durability in a low-energy setting.

Specifications:

• Header dimensions(H × W × L): 2-3/4" x 5-1/8" x 34" (Fine)
• Operator weight: 26.5 lb
• Internal power supply available for accessories: 24 volts DC ± 5% 1.5 Amps
• Maximum door opening angle: 110° (door stop recommended)
• Maximum wire size: 16 AWG
• Maximum door weight: 220 lb at 48" door width
• Door width: Minimum 28", Maximum 48"
• Axle extensions: 13/16" (20 mm), 1-3/16” (30 mm), 2-3/8" (60 mm)
• Reveal depth for pull arm: 1-3/16” (30 mm)
• Reveal depth for standard push arm: 0 to 9-3/4"
• Handing: Non-Handed
• Power supply: 115 volts AC ± 10%, 50/60 Hz Maximum 3.3 Amps, (SELV)