IML Security Supply
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Bottom Rail Two Point Deadlock, 603/US2G Zinc Plated

Part#: ADRMS1861-02-603
Hot#: 141298

Available: 31 ( 4 DAL, 6 DEN, 4 KAN, 2 LA, 9 LV, 4 SAC, 2 SLC )

  • Series Overview
  • Specifications
Notice: The info below is not item specific.

Adams Rite Manufacturing


The MS1861 Series MS® Bottom Rail Deadbolt provides maximum security with MS deadbolt over-center/pivot locking mechanism. It utilizes hardened steel bolts for the limited space of ultra-narrow stile doors. Function: Using the same over-center/pivot locking mechanism as the basic MS® deadbolt, the MS1861 lies horizontally in the bottom rail of ultra-narrow stile doors which have insufficient vertical space for a lock, and tempered glass doors which have no stile at all. The hardened steel cylindrical bolts allow simple drilled strike holes of a relatively small size to minimize the nuisance and danger presented by some threshold Strikes in collecting debris or snagging on high-heeled shoes. MS1861-02 locks either single-leaf or pairs of doors. Not recommended for wood doors. Operation 360° turn of key or thumbturn throws or retracts bolt(s). Key can be removed only when bolts are in a positively locked or unlocked position. Lock accepts any standard 1-5/32" diameter mortise cylinder from either or both sides. Cylinder must have MS® dimensioned cam.

Specifications:

  • Cylinder Backset: Minimum backset is approximately 2-1/4" for the MS1861-01 with vertical bolt only. The MS1861-02 with vertical and horizontal bolts requires placement of cylinder centerline 5-3/4" from nose of door. Both have cylinder center 1-7/8" above bottom edge of door.
  • Case: Steel with corrosion-resistant plate, measures 1" x 6" x 1-13/16".
  • Bolts: 3/8" diameter. Stainless steel vertical threshold bolt has 13/16" throw. Hardened steel horizontal bolt has 1-1/8" throw.
  • Strike: In metal installation, 7/16" drilled holes in threshold are required. For MS1861-02, drilled holes are also required in jamb or opposite door. For wood, metal plate with 7/16" hole must be provided for each bolt.
  • Cylinder Cam: MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32" diameter mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers.
  • 4014 Conversion Kit: Specify either 31/32" or 1-1/8" cylinder height 4006 strike and cylinder(s) available separately, if required.
  • Standard Package:
    • To convert MS1861-01 to MS1861-02, 4014 Conversion Kit provides horizontal bolt assembly with guide and attachment fittings.
    • The 4014 Conversion Kit consists of:
      • Arm and bolt assembly
      • Assembly pin
      • Bolt guide bracket
      • Mounting screws. To assemble, press pin through disc and arm.

Specifications for Adams Rite Manufacturing ADRMS1861-02-603

Other Specs
Alternate Codes141298, ADRMS1861-02628, MS1861-02-603, MS186102603
CategoryGlass Aluminum Hardware, Locking Hardware, Lock Sets
Door ApplicationGlass Aluminum Hardware
Faceplate Size6-7/8" x 1"
FunctionDeadlock
PackagingIndividually Boxed
SeriesMS1861