
Recessed Impacted CVR Concealed Vertical Rod Exit Device, 36in x up to 100in, Exit Only No Trim, 36in, 626/US26D Satin Chrome
Part#: VON9547EO-626-36
Hot#: 181571
Mfg: Von Duprin
Contact an IML Representative for Details
For exits with heights of 100in - 120in add adjustable extension rod kit - VON051808.
Notice: The info below is not item specific.
Von Duprin 9447/9547 Series
94/95 Impact concealed vertical rod device for use on factory prepped steel doors, not available for wood doors. The Impact device is UL listed for panic and fire, ANSI/BHMA 156.3 grade 1. The Impact device is non-handed.
Specifications:
- Device Functions: Device ships EO, DT, TL, L. Blank escutcheon (BE) available
- Device Lengths: 2'6" Up to 2'9" for 24 5/32" device. 2'10" up to 4' for 30 5/32" device
- Device Centerline From Finished Floor: 39-5/8" (1006 mm)
- Projection: 1-5/8" (41 mm) neutral. 1-1/4" (32 mm) depressed
- Latchbolt: 5/8" (16 mm) throw deadlocking latchbolt standard
- Door Undercut: 1/4" (7 mm) maximum
- Top & Bottom Latch Case Assembly: 4-1/2" x 2-1/8" x 1-1/2" (114 mm x 54 mm x 38 mm)
- Vertical Rods: Two-piece adjustable rods, door 6'8" (2032 mm) to 8'0" (2540 mm) can be adjusted by removing the latch side endcap
- Fasteners: Included for surface mounting to recessed door prep and through bolting to trim
- Electric Options:
- QEL: Quiet electric latch retraction
- Bolt retraction via switch
- Converts exit door to push-pull operation
- LX: Latchbolt monitor switch
- Signals use of an opening
- SPDT switch to monitor latch bolt
- Mechanical Options: LBR: less bottom rod - For pairs of vertical rod devices
- Dogging Option: Hex key dogging
- Strikes: Top - 338 unfinished, bottom - 385A unfinished
Standard Trim:
- EO: Exit only
- DT: Dummy trim. Pull when dogged
- ANSI: 02
- Pull overall length: 3-5/8" x 11-9/16" (93 mm / 294mm)
- Pull center to center: 10" (254 mm)
- Projection/Offset: 2-5/8" x 1-7/8" (67 mm / 48mm)
- TL: Thumbturn key. Key locks & unlocks (use with DT trim)
- ANSI: 11 or 12
- Escutcheon plate size: 7-1/2" x 1-11/16" (190mm x 43mm)
- Projection/Offset: 2 5/8" x 1 7/8" (67 mm x 48mm)
- Cylinder type: 1-1/4" Mortise
- L: Lever, key locks & unlocks
- ANSI: 08
- Escutcheon plate size: 8" x 2-1/4" x 1-1/8" (203 x 57 x 29 mm)
- Projection: 2-3/32" (75 mm)
- Cylinder type: 1-1/4" Mortise
- Handing: Handed/reversible
- L-BE: Lever blank escutcheon. Always operable (no cylinder)
- ANSI: 14
- Escutcheon plate size: 8" x 2-1/4" x 1-1/8" (203 x 57 x 29 mm)
- Projection: 2-3/32" (75 mm)
- Handing: Handed/reversible
- L-DT: Lever dummy trim. Pull when dogged
- ANSI: 02
- Escutcheon plate size: 8" x 2-1/4" x 1-1/8" (203 x 57 x 29 mm)
- Projection: 2-3/32" (75 mm)
- Handing: Handed/reversible
- L-NL: Lever night latch. Unlocks lever, relocks upon key removal
- ANSI: 03
- Escutcheon plate size: 8" x 2-1/4" x 1-1/8" (203 x 57 x 29 mm)
- Projection: 2-3/32" (75 mm)
- Cylinder type: 1-1/4" Mortise
- Handing: Handed/reversible
Finishes:
- 605 - Bright brass
- 606 - Satin brass
- 625 - Bright chrome
- 626 - Satin chrome
- 628 - Aluminum, anodized
- 710 - Duranodic dark bronze
Specifications for Von Duprin VON9547EO-626-36
Other SpecsAlternate Codes | 9547EO-626-36, 9547EO62636 |
Category | Panic Devices, Panic Devices & Exit Alarms, Recessed Panic Devices |
Certifications | A156.3, ANSI, ANSI/UL 305, BHMA |
Device Width | 36" |
Dogging | HD - Hex Dogging |
Door Application | Panic Devices & Exit Alarms |
Exit Device Category | Concealed Vertical Rod Exit CVR |
Finish Code | 626 |
Finish Color | Brushed Chrome, Satin Chrome |
Function | Exit Only |
Grade | Grade 1 |
Manufacturer | Von Duprin |
Series | 94/95 |
Strike Type | Vertical Rod Bottom Strike |