3/4in Round Stainless Entry Button or Door Bell, Weather Resistant, Water Proof, Single Gang Stainless Steel Plate, Double Pole, Momentary, Normally Open No
Part#: DRTWR5276-HD29-E1
Hot#: 182076
Available: 7 ( 7 KAN )
Notice: The info below is not item specific.
Dortronics Systems, Inc.
Heavy duty, water proof, push button switch constructed of brushed stainless steel is ideal in exterior applications and for use in harsh operating conditions. A neoprene gasket is included for mounting the switch plate.
Features:
- Suitable for Wash down Applications: The WR5276 series button is rated to a sealing degree of IP65. (Protected against water projected from a nozzle from any direction).
- LED Illuminated Indicator: The optional bi-color LED ring can be utilized to provide visual indication of switch status or may be controlled independently by other devices. The Illuminated LED ring color is red or green depending on the polarity of the 24 volts DC applied to the independent LED ring contacts
- Dual Form Z Switch Contacts: Isolated normally open and normally closed switch contacts allow simultaneous control of independent circuits; such as controlling normally closed lock power while signaling the access control system with a normally open contact.
- Alternate or Momentary: The WR5276 series push button switches are available with momentary or alternate-action switch operation.
- Optional Engraving: Along with standard switch plate sizes, and five standard engraved legends, custom plates and text can be made to specification with quick turnaround.
- WR5276-HD28 – Alternate Action Form Z Non-Illuminated
- WR5276-HD28xLRG – Alternate Action Form Z & Illuminated LED Ring
- WR5276-HD29 – Momentary Action Form Z Non-Illuminated
- WR5276-HD29xLRG – Momentary Action Form Z & Illuminated LED Ring
Specifications:
- Physical Data:
- Actuator Material – Brushed Stainless Steel ¾” Dia.
- Actuator Force – 550 +/-50gF
- Operating Temp – -130F to 1580F, -250C to 700C
- IP Rating – IP65 Waterproof Button
- Electrical:
- Contact Rating - 2A @ 24VDC, 2A @ 125VAC
- LED Ring - Red / Green 24VDC, 120 mA Peak Current, 20 mA Operating Current
Optional Engraving:
- E1 – “PUSH TO EXIT”
- E2 – “PANIC”
- E3 – “EMERGENCY RELEASE”
- E4 – “PUSH TO RELEASE”
- E5 – “EMERGENCY DOOR RELEASE”
- E6 – Custom Engraving
Specifications for Dortronics Systems, Inc. DRTWR5276-HD29-E1
Other SpecsAlternate Codes | WR5276-HD29-E1, WR5276HD29E1 |
Category | Access Control, Hardwired, Pushplates/Buttons & Switches |