Alarm Lock Systems Inc

The Trilogy Networx is a Gateway device used within the Trilogy Networx™ wireless system. Combines with wireless wall-mounted expanders and plug-in wireless expanders to cover more building space with a single IP address. Installation is simple, only requiring access to one RJ-45 Ethernet network cable for both communication and power.

Features:

• Network gateway for Networx lock systems
• Power-over-Ethernet (POE) gateway – no power supply or adapter needed
• Expand your Networx lock system with up to 7 Expanders (AL-IME2-EXP) – Note expanders cannot communicate with older Gen 1 Gateways
• Mount within 175 feet (radially) from the intended wireless lock location(s)
• Expanders should be mounted in elevated areas – recommended mounting position 6 to 12 in. below standard 8-9 foot ceiling
• Cost-effective and easier to wire than conventional gateways
• Networx system automatically identifies all newly powered Expanders and quickly self-determines the best wireless signal pathways
• Each Gen. 3 Gateway and a maximum of seven (7) Expanders can be addressed as one group
• Total of 99 addressable groups supported (addressable by two rotary switches)
• Open areas increase range while concrete building construction, walls, ceilings and narrow corridors decrease range
• Drop ceiling installation not recommend, signal strength may be affected
• Generation 3 Gateways are compatible with DL-WINDOWS version 5.5.4 and later only
• Generation 3 Gateways can be mixed into an existing system that includes older “non-version 3” gateways
• Optional hardwired switch that connects directly to the gateway to initiate global lockdown

Specifications:

• Dimensions: 4.5 (H) x 6.0 (W) x 1.94 (D) in.
• Ethernet: 100Base-TX (Using RJ-45 Jack), 10Base-T
• Wireless Protocol: DHCP, TCP/IP, UDP/IP
• Power: POE
• Radio Frequency: 900MHz
• Storage Temperature Range: -40° to 185°F (-40° to 85°C)
• Operating Temperature: -4°F – 140°F (-20°C – 60°C)