IML Security Supply
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
Welcome to IML Welcome to IML
 
Full Surface Geared Continuous Hinge, Heavy Duty, 83in, Clear

Part#: HAG780-157HDCL
Hot#: 105351
 Finish: Satin Stainless Steel

Available: 58 ( 21 SLC, 37 STX )

Will hold up to 600lb.


  • Overview
  • Specifications

Hager Companies 780-157HD Heavy Duty Full Surface Hinge


Model 780-157 is an Aluminum Continuous Geared Full Surface Hinge that provides a 1/16" door inset. It can be used with any standard frame without hinge preps, and either with or without reinforcements depending on door weight. The frame face must have a flat surface at least 7/8"wide. Clearance between the hinge edge of the door and the frame rabbet may be from 1/32" to 1/8" (0.8 - 3.2 mm). "HD" models have additional bearings for heavy-duty application.

Hinge Length: Hinges are supplied apporximately 1" to 1-5/16" shorter than the nominal door height to avoid threshold or carpet clearance problems. If the hinge must be trimmed shorter, first determine the correct hand of the door and orientation of the hinge. Then mark and trim the bottom of the hinge only - do not cut the top end.

Application: For surface applications where frame face dimension is limited

» Security moldings
» 1/16" (1.5 mm) inset


SPECIFICATIONS

  • Clearance:
    • 1/32" (1 mm) minimum recommended between doors
    • Plus standard lockside clearance
    • Refer to Door and Frame Dimensioning in the General Information section for further details
  • Fasteners:
    • 1/4-20 x 1-1/4" Sexbolt (Screw + Post)
    • #12-24 X 11/16" Flat Head Self-Drill Screws
  • Length Options: Standard and Custom
  • Door Reinforcement: None required
  • Frame Reinforcement: None required to 200 lbs. Heavier weigh use 16-gauge channel.
  • Fire Rating: Up to 3 hr. metal and 90 min. wood composite (with studs)
  • Warranty: All Roton products have a lifetime warranty. When ordering electric Roton, the electric portion of the hinge has a one-year warranty.
  • Material: Aluminum 6063-T6

Specifications for Hager Companies HAG780-157HDCL

Specifications
Finish ColorSatin Stainless Steel
Hinge Rating600 lbs
Hinge Size83"
Other Specs
Alternate Codes048059, 105351, 780-157HDCL, 780157HDCL
CategoryContinuous Hinges, Hinges
Hinge StyleFull Surface with Stud
Hinge TypeContinuous Hinge