Bosch Security Systems

The blue line Gen2 quad PIR detector (ISCBPQ2-W12) uses two individual sensors that operate like two PIRs in one detector. Each sensor processes signals separately. Both must activate to generate an alarm signal. This improves false alarm immunity relative to a standard PIR, because false alarm sources such as noise spikes and small animals are ignored. Quad detectors also provide superior catch performance versus a standard PIR or dual technology detector. They are particularly well suited for challenging installation situations; for example, cases where cross catch of intruders cannot be guaranteed or where intruders are able to cross the detection pattern very quickly.

Features:

• Dynamic temperature compensation – superior catch performance in any environment
• Wall to wall coverage – superior catch performance
• Flexible mounting height, no adjustments – reduce installation time and false alarms, improve catch performance
• Self-locking enclosure with integrated bubble level – reduce installation time
• First step processing (FSP) almost instantly responds to human targets without producing false alarms from other sources. FSP adjusts the detector's sensitivity based on signal amplitude, polarity, slope, and timing. This eliminates the need for the installer to select the sensitivity level, thus improving ease of installation and reliability.
• The detector intelligently adjusts its sensitivity to maintain its ability to identify human intruders at virtually any temperature.
• An improved lookdown zone and coverage range of 12 m x 12 m (40 ft x 40 ft) provide wall-to-wall coverage.
• The sliding self-locking enclosure has an integrated bubble level and custom gap‑free, lift‑gate style terminal blocks to make installation easier.
• The optics and electronics are assembled into the front enclosure and sealed with a protective cover to prevent damage during installation. The sealed optical chamber also prevents drafts and insects from affecting the detector.
• Externally visible alarm LED can be disabled after installation.

Specifications:

• Current (alarm/standby): 10 mA at 12 VDC
• Voltage (operating): 9 VDC to 15 VDC
• Operating Temperature: -30°C to +55°C (-20°F to +130°F)
• Radio Frequency Interference (RFI) Immunity: No alarm or setup on critical frequencies in the range from 150 kHz to 2 GHz at field strengths less than 30 V/m.
• Dimensions: 105 mm x 61 mm x 44 mm (4.2 in. x 2.4 in. x 1.7 in.)
• Material: High-impact ABS plastic