EtherWAN Systems

EtherWAN’s EasyLink MP is a pre-configured Multipoint Bridge kit which allows for connecting a set of remote locations wirelessly up to 2 miles away. EasyLink MP’s simple setup allows you to connect locations by mounting the hardware, powering them on, and aligning the units using the built-in alignment LEDs. Each kit contains one central bridge unit plus two/four/six auxiliary units that connect automatically using a highly secure, unique, and hidden SSID and randomly generated passphrase to keep your valuable equipment secure right out of the box. No need for complicated setup software, just plug it in, aim it and you are connected.

Features:

• Mount units to a pole or wall using included mount kit
• Signal strength LED’s for easy alignment
• Just power and align using supplied PoE injectors and power supplies.
• No technical expertise needed
• Fanless and ruggedized outdoor IP67 enclosure (Rainproof)
• Wide operating temperature range (-40° to 167°F)
• Connections up to 2 miles away
• Encrypted & Authenticated Wireless Connection (WPA2)
• Every kit has unique SSID and security settings
• Management Frame Protection (MFP) enabled

Specifications:

• EasyLink MP Primary Node:
• Dimensions: 270 x 565 x 76mm (W x H x D) 10.63” x 22.25” x 3”
• Weight (shipping): 6.2lbs (2.81kg)
• Installation Type: Pole/Wall
• Casing Material: UV Protected Polystyrene case
• EasyLink MP Auxiliary Node:
• Dimensions: 185 x 185 x 63.5mm (W x H x D) 7.28” x 7.28” x 2.5”
• Weight (shipping): 2 units per box: 7.15lbs (3.25kg)
• Installation Type: Pole/Wall
• Casing Material: UV Protected Polystyrene case
• Environmental:
• Operating Temp: -40 to 75°C (-40 to 167°F)
• Storage Temp: -45 to 85°C (-49 to 185°F)
• Relative Humidity: 5% to 95% (non-condensing)
• Wind Survivability: 200km/h
• Frequency 5 GHz
• Max data rate 300 Mbit/s
• Number of chains: 2 per unit
• Standards 802.11a/n
• WPA2 Passphrase
• 256-bit AES-CCM Encryption
• Dynamic Frequency selection

Ordering Information:

• EasyLink-300-US-MP-02: 2 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 3 x 24VDC, 1.5A Power Supplies, 3 x Passive PoE Injectors and 3 x Mounting kits.
• EasyLink-300-US-MP-04: 4 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 5 x 24VDC, 1.5A Power Supplies, 5 x Passive PoE Injectors and 5 x Mounting kits.
• EasyLink-300-US-MP-06: 6 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 7 x 24VDC, 1.5A Power Supplies, 7 x Passive PoE Injectors and 7 x Mounting kits.
• JPole18: 18” Wall Mount J-Pole
• EasyLink-PSU-INJ: Replacement Power Supply and Gigabit Passive PoE Injector for EasyLink Wireless Bridge Series
• Cable 25: 25' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Cable 50: 50' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Cable 150: 150' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Cable 300: 300' Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• EPOW-24-60-A: Hardened Power Supply rated for use in temperatures -40°F to 167°F
• PoEPowerEZ: PoE Switch to EasyLink Adapter Hardened -40°F to 165°F (Eliminates the need for apower supply)